View Full Version : 95 - One Use Brakes and Rotors

02-15-2007, 12:02 PM
Hi Guys,
I have a full set of stock rotors and brakes that have never been cut and the pads are about 3/4 - 1/2 left. The rotors are warped but can be cut. If someone local wants them, they are yours. Hopefully my days of warped rotors are over!!

10-02-2008, 09:18 PM
I am there with you.... How did you solve the problem and stop the disc warp? I need to do it too.

95 Red 5 Speed

10-02-2008, 11:30 PM
after 6 supercoupes and 2 Mark 7's and 11 Mark 8's, I can tell you the best way is to use a torque wrench to torque the wheels EVERY time one is loosened. Next, I use stock rear pads, and semimetalic front pads. Break them in properly - 6 hard stops from 60 mph and let them cool completely.

10-07-2008, 10:49 AM
Hi Ralph,
"How did you solve the problem and stop the disc warp?"
After replacing the rotors with stock and having them warp within 2 months, I decided to try something different (and hopefully better).

I went with the slotted, drilled rotors and pads from Spinning Wheels. Since then, NO WARPING!!!!!!!!!!!!!!
Also, I am still on the original pads from Feb. 2007.