Auto to Manual?

Its not difficult, just a lot of parts to change over. Make sure you have everything you need before pulling it apart. Everything will bolt right in. The firewall is already dimpled where you need to drill the holes for the pedal. Hardest part is probably pulling the dash out a bit to drill the holes and install the pedal.

Mike
 
The hardest part of the swap is hanging the clutch pedal but it's not that bad. You don't need to pull the dash away. I bought a 90degree angle attachment for my drill at harbor freight and a really good 2" hole saw bit. I had to cut a 3/8" drill bit in half so I had the right clearance. It took me about an hour to hang the pedal and install the clutch master cylinder.
 
Back
Top