Comp Cams

rbrown

Registered User
Searched a bit and cannot find where anyone has used one of the new cams.

I'm sure there are you out there. Tell me your thoughts and experiences.

Looking at Comp 44-703-9
265 281 duration
210 226 .50 duration
.500 .500 lift
115 degree separation.

Listings show it as lopey. I cannot see it as such. And at 115, I would think idle and vacuum would be great.
 
There may be one or two people with an off-the-shelf Comp Cam so there are not many results out there to compare. Those cams were spec'd to match stock heads and work with Comp's springs. If you have ported heads that cam would not be ideal. It's the same price for a custom grind so most people go with custom.
 
Back
Top