PDA

View Full Version : Performance Parts for sale



XR7 Dave
04-02-2007, 03:38 PM
Performance parts for sale:

90MM L-MAF - $50 Part # L13F-12B579-AB -Sold
Adapter for L-MAF to K&N cone filter - $20 - Sold
3" chrome intake tube with silicone connectors and 9" K&N - $75 - Sold
Magnum Powers 3.5" intake tube and cold air divider, missing bracket - $100 - Sold
BBK 75MM TB, very little use - $150 - Sold
76MM C&L MAF (used), your choice of sample tubes - $100 - Sold
Very low mileage MPII blower with 10% pulley - $500 - Sold
MP inlet plenum - $380 Sold
42lb injectors, very low mileage - $190
3 pc. Billet tensioner pulleys, like new - $75 -Sold
SCI stock size aluminum JS pulley - $75

Shipping included in lower 48. Pictures included below.

Thanks!

David

91_SC_BIRD
04-02-2007, 05:31 PM
75MM TB

I'm getting it!!! Consider it SOLD!

DrFishbone
04-02-2007, 05:55 PM
Dave,

Will you sell the 76mm sample tubes separately? If so, what's the price on a 42lb injector size?

BirdofPrey97
04-02-2007, 06:14 PM
If the Magnum powers inlet falls thru let me know. Otherwise I will take the 3" inlet.

Todd

XR7 Dave
04-02-2007, 06:27 PM
Sorry, post above showed 3" intake by itself but I have a 9" K&N to go with it. All together $75.

I have sample tubes available seperate. $35 shipped for any calibration.

Dahoopd
04-02-2007, 06:55 PM
Dave,

Whats the real differqance between the MPII and a ported (s-port) 94/95. I contacted Charles today about sending mine out to be ported. Might be more beneficial to get the MP II and sell my 94/95. Thanks

XR7 Dave
04-02-2007, 07:17 PM
Dave,

Whats the real differance between the MPII and a ported (s-port) 94/95. I contacted Charles today about sending mine out to be ported. Might be more beneficial to get the MP II and sell my 94/95. Thanks

This would be an excellent opportunity to upgrade quickly and painlessly. Heck I'll even make you a trade on the blowers. This blower is basically a brand new rebuild and MPII conversion from MP. It had only just been installed when the motor underneath it went.

Treys92
04-02-2007, 08:23 PM
Dave,

If Dahoopd isn't interested in the blower trade, pm or e-mail me with details and I'd most likely be interested. Tsolorio AT bradley.edu

Thanks,

Trey S.

Dahoopd
04-02-2007, 10:05 PM
This would be an excellent opportunity to upgrade quickly and painlessly. Heck I'll even make you a trade on the blowers. This blower is basically a brand new rebuild and MPII conversion from MP. It had only just been installed when the motor underneath it went.


PM sent. My blower is brand new never installed. Let me know what you want to work out (pm). Will my MP plenum work with this.

XR7 Dave
04-02-2007, 11:20 PM
PM sent. My blower is brand new never installed. Let me know what you want to work out (pm). Will my MP plenum work with this.

Yes, this is made for the MP plenum.

Dahoopd
04-02-2007, 11:48 PM
Yes, this is made for the MP plenum.
Let work it out. Thanks

XR7 Dave
04-03-2007, 08:23 PM
Pic of the 3.5" intake with cold air divider, 9" K&N, and 90MM Lightning MAF.

XR7 Dave
04-03-2007, 08:24 PM
Pic of the 3" intake tube and 9" K&N. I don't know whose intake tube this is.

XR7 Dave
04-03-2007, 08:25 PM
Pic of the 76MM MAF. I will include any calibration tube you need.

XR7 Dave
04-03-2007, 08:27 PM
Pics of MPII and MP inlet plenum.

XR7 Dave
04-03-2007, 08:28 PM
Pic of the 42lb injectors. As you can see they are Lucas brand.

XR7 Dave
04-03-2007, 08:37 PM
Pics of tensioner pulleys. Set of 3, these have replaceable bearings. They are basically brand new, they sold for $43 each new. Set of three for $75 shipped (lower 48).

XR7 Dave
04-03-2007, 10:47 PM
Pic of SCI stock diameter pulley. Used very little.

Payton
04-03-2007, 11:46 PM
Pic of SCI stock diameter pulley. Used very little.

Dave, sending you PM about JS pulley

Ronald Wendt
04-04-2007, 12:52 PM
PM sent for the C&L MAF, I'll take it!

Ron

XR7 Dave
04-05-2007, 08:46 AM
PM sent for the C&L MAF, I'll take it!

Ron

Ron, I got your PM, I'm waiting for a response from another person, if they don't get back to me today sometime then it's yours.

Thanks,

David

ThunderRoad
04-09-2007, 04:06 PM
Pics of tensioner pulleys. Set of 3, these have replaceable bearings. They are basically brand new, they sold for $43 each new. Set of three for $75 shipped (lower 48).

ARE THEY THE SAME SIZE AS STOCK DIA AND WIDE:confused:

vance720
04-22-2007, 08:37 PM
Is the js pulley gone ?

BirdofPrey97
04-22-2007, 10:01 PM
Dave,

Let me know if the MAC intake is sold or not. If not I will grab it. Can send $ via paypal immediatly.

Thanks.

XR7 Dave
04-23-2007, 05:53 PM
I still have the 42lb injectors and the JS pulley. Everything else is gone. I'll be putting up a new post with more parts soon but that's all for now.

Dahoopd
04-23-2007, 09:26 PM
Pics of tensioner pulleys. Set of 3, these have replaceable bearings. They are basically brand new, they sold for $43 each new. Set of three for $75 shipped (lower 48).

Sum Beach! I just bought these brand new from Victor.

BlownV6
04-23-2007, 09:39 PM
I imagine i will need a computer upgrade to run the 42lbers correct?

charged92
04-23-2007, 09:57 PM
Sum Beach! I just bought these brand new from Victor.

That's where you get em?

XR7 Dave
04-23-2007, 10:49 PM
I imagine i will need a computer upgrade to run the 42lbers correct?
You can "run" with just an MAF and the injectors, but for it to be right you'll need a chip. I'll make you a deal on all three if you want.

BlownV6
04-23-2007, 11:56 PM
You can "run" with just an MAF and the injectors, but for it to be right you'll need a chip. I'll make you a deal on all three if you want.

I'm all ears. :D

quick35th
04-24-2007, 12:48 AM
David,

I might be in need of those 42lbs injectors. My 35th seems to be missing slightly and when I changed spark plugs two of the plugs looked brand new while the others were fouled. Not sure if I just didn't have the plug wires on all the way or not. I'll give you a call about them.

Shane

XR7 Dave
04-24-2007, 08:00 AM
I'm all ears. :D


Injectors, 76MAF, and chip for $550 shipped.