need help with codes

oneloudsc

Registered User
i have been having problems with my 95 t bird sc and so i pulled these codes and now i need someone to help me figure them out


this is with the key on engine off

118 and 214

and .these are with the engine running 116 and 536 and 632


any help would be great cause im not sure what all these codes mean thanks james
 
All I know about is 214. That's the camshaft sensor. Bought a new one from Ford and two screws and 30 minutes later for replacement, and all was well.
 
ok 118 is trouble with the ACT or ECT sensor
214 is the Cylinder Identification Sensor (cam sensor)
116 is the coolant temperature sensor
536 is brake switch (was the brake depressed during the "engine on" part of the test?)
632 this one is strange, it is the "4x4 LOW/Overdrive cancel switch"
They are not in the test pass range for some reason . they could be connected so change one at a time then rerun the tests.
Review the test procedure carefully , you are to push on the brake during the test as well as floor the throttle for a brief moment to properly complete the test. good luck
 
Last edited:
code 632

When you are through with flooring the throttle turning your steering wheel pushing brakes to the floor #632 is you have to push the little OverDrive cancel button (should be on the shifter)
 
Back
Top