Shifter handle wiring

fixmysc

Registered User
Hi folks;
I haven't seen this while searching the posts, so I'll ask.
I was putting the shifter handle back on the auto transmission of my '95 SC when the wire that goes into the shifter broke. I'm not sure how I can fiix or reattach the wires (2 wires) as they go into the leather shifter handle which appears to be one piece. Anyone seen this before or have any advice?

Thanks,
Art
 
the 2 wires are for the OD button on the handle. I just went to the junkyard and got another handle in good working condition. rather than trying to fix the broken one.
 
Shifter replacement

Thanks for the reply;

Does the shifter have to come off the sc, or is it common on other ford products?

Anyone ever repaired one?

Thanks, Art
 
Thanks for the reply;

Does the shifter have to come off the sc, or is it common on other ford products?

Anyone ever repaired one?

Thanks, Art

you can use one off any 94-95 t-bird, I changed mine because the OD button wasn't working and I actually went through about 4 from the junkyard before I found one that the button worked but at $3 each it didn't break the bank. As far as fixing them I tried but I couldn't get it to work so it was easier to change it.
 
Back
Top