tbird462002
Registered User
Well i decided to part out my 97 because i need to get it out of my driveway so here we go.
MMC Driveshaft Perfect Shape 350
3.73 Pumpkin Professionally built by the best rear end shop in town. Has auburn pro and timken bearings. Less than 3000 miles
650
Pbr calipers and pads with only about 1000 miles
100
02 GT Maf
80
Stainless braided brake lines all 4
120
addco 1 3/8 rear sway bar, has some rust because the powder coat peeled off , comes with correct endlinks too
100
Triple gauge pillar in gray, very good condition minor scxrath by one of the bolt holes
40
Magencor wires
50
NPI Intake with aluminum crossover
130
NPI heads
100
Rear shock tower brace
30
03 Cobra Rear Shocks
100 only about 8,000 miles on them and they come with the bushing kit
Vogtland Rear springs 1.6 kit
100
Front Vogtland springs with thunderbird sport front shocks about 8k on them
I will not seperate these
150
2 Non abs halfshafts
75
3 Autometer Ultra lite gauges half sweep
Oil pressure - no sending unit 40
Volts - 40
A/F - 40
2.25 True dual mid mounted magnaflow exhaust
It was custom bent for my car so there may be minor modification for it to fit perfectly
Pick up only 300
1/2 billet intake spacer
20
Update :
Also have brand new oem ford headlights they havent even been on the car for 6 months
The little black tabs are messed up that lock them into the header panel but you can reuse the ones from your headlights already on the car
100
Clear Corners
Near perfect conditon
30
Rear led panels
Led's work perfrectly fine
100
Maroon stock spoiler with 3rd brake light paint is in decent shape
75
I also have every interior trim piece so pm me if you need something, the car also has a moonroof
If paypal is used please add 3.5% for fees
MMC Driveshaft Perfect Shape 350
3.73 Pumpkin Professionally built by the best rear end shop in town. Has auburn pro and timken bearings. Less than 3000 miles
650
Pbr calipers and pads with only about 1000 miles
100
02 GT Maf
80
Stainless braided brake lines all 4
120
addco 1 3/8 rear sway bar, has some rust because the powder coat peeled off , comes with correct endlinks too
100
Triple gauge pillar in gray, very good condition minor scxrath by one of the bolt holes
40
Magencor wires
50
NPI Intake with aluminum crossover
130
NPI heads
100
Rear shock tower brace
30
03 Cobra Rear Shocks
100 only about 8,000 miles on them and they come with the bushing kit
Vogtland Rear springs 1.6 kit
100
Front Vogtland springs with thunderbird sport front shocks about 8k on them
I will not seperate these
150
2 Non abs halfshafts
75
3 Autometer Ultra lite gauges half sweep
Oil pressure - no sending unit 40
Volts - 40
A/F - 40
2.25 True dual mid mounted magnaflow exhaust
It was custom bent for my car so there may be minor modification for it to fit perfectly
Pick up only 300
1/2 billet intake spacer
20
Update :
Also have brand new oem ford headlights they havent even been on the car for 6 months
The little black tabs are messed up that lock them into the header panel but you can reuse the ones from your headlights already on the car
100
Clear Corners
Near perfect conditon
30
Rear led panels
Led's work perfrectly fine
100
Maroon stock spoiler with 3rd brake light paint is in decent shape
75
I also have every interior trim piece so pm me if you need something, the car also has a moonroof
If paypal is used please add 3.5% for fees