PDA

View Full Version : SCI 5% jackshaft pulley and belt

Shockwave
05-08-2007, 04:06 AM
Up for sale is a mint condition SCI R1050 5% overdrive jackshaft pulley. Also will include a K080400 Gates blower belt this is the slightly longer belt that came on 94-95 SCs, only 3000 miles on belt. The longer belt is needed if you use a 76mm SC idler pulley and have a stock SC pulley. Would like to get $110 shipped UPS ground. I prefer paypal, but will take certified bank check, no money orders.

Thanks
Jerry


http://s93260528.onlinehome.us/ebay/sci/pulley.jpg
thunderkid84
05-08-2007, 05:37 AM
ya got a PM
DirtySouthBird
05-08-2007, 05:38 AM
got second dips, if he dont take it.. sent ya PM..as well
ThunderDave
05-08-2007, 12:57 PM
Jerry, I got a question. I've got a 10% od pulley and fixing to install a 5% jackshaft pulley. Will I need that belt to run that set up? I think the belt I have now is a 39.2 or something like that.

Thanks!
Shockwave
05-08-2007, 08:41 PM
got second dips, if he dont take it.. sent ya PM..as well

You have a PM.
Shockwave
05-08-2007, 08:44 PM
Jerry, I got a question. I've got a 10% od pulley and fixing to install a 5% jackshaft pulley. Will I need that belt to run that set up? I think the belt I have now is a 39.2 or something like that.

Thanks!

I was running the standard 392 belt with 10% OD SC and 5% jackshaft. I run a 76mm SC idler pulley instead of the stock 70mm one be the way.
ThunderDave
05-09-2007, 04:15 AM
I was running the standard 392 belt with 10% OD SC and 5% jackshaft. I run a 76mm SC idler pulley instead of the stock 70mm one be the way.


Thanks for the info. I guess the one I have should be fine then.
Shockwave
05-10-2007, 04:18 AM
Still for sale
Shockwave
05-14-2007, 05:40 AM
bump to the top
Shockwave
05-21-2007, 02:24 AM
This is in very nice condition, would be great for someone who wants to run the stock SC pulley.