Anyone have issues with the 13" cobra brake upgrade?? Clunk sound on braking...

lube70

Registered User
I installed the Cobra brake set-up on my 95 SC and when driving, if I hit the brakes, you hear a "CLUNK" and another "CLUNK" when releasing the brake.

I assume its the bad or caliper shifting.

Any help is appreciated.

P.S. It won't do it unless the car is moving. If still, no sound.

Thanks in advance for the help.


Don
 
Sure the pads are installed in the calipers correctly and the E Ring and pin at the bottom of the caliper is positioned correctly???????

Does it occur both in the forward direction a well as reverse?
 
Hey Duffy...

You are correct, the pin was located in the wrong hole. It's supposed to be in the hole closer to the door. I think it was that way when I got it.

I will address it when I take the wheels off to change the center caps.

Don

P.S. Does that mean I have to change the pads also????
 
Don,

I guess it would depend on how the pads wore when the pin was mispositioned and also if any of the end tabs broke , cracked or bent??????
 
Back
Top