We are accessing & replacing the motor mounts from the rear since the catalytic converters are off for a clutch job. On the passenger side there is what appears to be a cylindrical heat shield (~ 6" length X 2" dia) surrounding a sensor which goes into the engine block. It is blocking access for the new mount. Anyone know what this sensor is and whether it needs to be removed to remove the heat shield?
Note - we got to all of the plugs from under the car except the front one on the passenger side which we will need to do from above.
Thanks for any input.
Note - we got to all of the plugs from under the car except the front one on the passenger side which we will need to do from above.
Thanks for any input.