Harmonic Balancer

Not sure how far it goes into the timing cover, but this installation article may give you the info your looking for.

http://www.mn12performance.com/mn12how-to/BHJ/BHJ-install.html

David
Rich stated that he removed 0.015 from the ID of the balancer. That's actually misstated. He removed 0.015 from the IR or 0.030 from the ID to get the balancer to fit onto the crank.

I don't know about you all, but thats a heck of a lot of steel to be grinding off with a hone. :eek:
 
Back
Top