PDA

View Full Version : Tourqe Specs?



OneFastBird
07-15-2007, 01:18 PM
I have most of the specs that I need but now all of them. Does anyone know what the tourqe specs are for the main bearings and connecting rods?

Thanks

Mike8675309
07-15-2007, 09:06 PM
you really need a book for this. Are you using ARP or Factory?

ARP Rod bolts they like you to use a stretch gage. The torque depends on the size of the bolt in the rods.

If they are a factory rod, I'm not sure, that would be in the book.

Main bolts are also gonna be in the book unless you went to ARP studs. Those were 80ft/lbs for ARP studs if I recall correctly. (If not, someone will correct me)

OneFastBird
07-16-2007, 09:21 PM
They are scat connecting rods, if that helps anyone?

mywhite89
07-16-2007, 09:24 PM
They are scat connecting rods, if that helps anyone?

Hey do you have the box that those rods come in? They will tell you the torque specs. If not, tell me the number that is on the bolts and I'll let you know

edit: I have the box in front of me now. Let me know if its a 7/16 or a 3/8 screw and I think its a ARP8740 bolt but its been a while.