PDA

View Full Version : 7.3 inch trickflow pushrods fs

mywhite89
07-18-2007, 08:10 AM
Installed these in my supercoupe, but these were a tad bit too long for my application. My engine has been decked and the heads ressurfaced so I had to step down .1 inch on size.

I bought these from supercoupes Unlimited and they are in new condition with 0 miles on them.

.

Chris
mywhite89
08-02-2007, 06:56 PM
bump. These will fit many applications of supercoupes. if their is any interest in these at all let me know. I have absolutely no use for them. They costed me $100.00 new, so shoot me an offer.

These are a great upgrade for someone who is doing a mildly aggressive cam. If you are planning on doing a pretty aggresive cam like mine get with me on these and I will help you to determine what size pushrods you need.

It is always best to buy your pushrods after your motor is back together and you come to the point where it is time to figure out what size pushrods you actually need.

Chris
deepbluesc
08-02-2007, 07:42 PM
To the stock size? I am interested, but my motor is still as it came from FoMoCo so many years ago. I know I'll do a cam at some point, but not until I at least need to do the HG.

Let me know!
mywhite89
08-03-2007, 12:10 AM
To the stock size? I am interested, but my motor is still as it came from FoMoCo so many years ago. I know I'll do a cam at some point, but not until I at least need to do the HG.

Let me know!


These are slightly shorter then the stock length. The right way to do it is buy the cam, then measure what length you need and buy at that time.
mywhite89
08-06-2007, 08:54 PM
hey, one more bump just for good measure then they get lost in my realm of un-used parts!!
Pablo94SC
08-06-2007, 09:19 PM
Hmm... are these chrome-moly? I will be needing a set, but until I decide on my cam, I don't know what size I'll be needing. Keep me in mind before you lose these in the garage.
mywhite89
08-07-2007, 02:34 PM
Hmm... are these chrome-moly? I will be needing a set, but until I decide on my cam, I don't know what size I'll be needing. Keep me in mind before you lose these in the garage.

Alright I will do that. I'll try to keep them from becoming paint stir sticks! They are chrome-moly I belive, I'll have to look at my receipt. I think I have them sold though, we'll see.
mywhite89
08-10-2007, 09:00 AM
bump. These are still available, ready to be shipped out.

Chris