Car is located in Dickerson md 20842.1994 Thunderbird SC black 5spd with about 120,000 miles on it. Has grey leather interior and is in excellent shape. 4 new Yokomo tires and stock rims and a 10 disc cd changer. From the list you can tell I planned on keeping the car but I ran out of money and I can only have 1 car at the place I’m renting. So sadly I must give up on my project.
Within the last 500 miles: (I have receipts for just about everything I listed)
New 76mm mass air meter and brand new 02 sensor $250 for both
Oil Change with synthetic
Fuel filter change
New serpentine belt $35
New supercharger belt $25
New clutch master cylinder $125
New clutch slave cylinder $188
Custom down pipes $250
Modified v6 mustang headers with egr and new gaskets $200
New electronic shocks all around $500
Four wheel alignment $80
Used long block with less than 20,000mi installed with new upper gaskets and steam cleaned engine paid $900 for engine and $120 for gasket set $1200 labor
March underdrive Billet aluminum pulley set installed (ex alt pulley) $250
BHJ Harmonic balancer and bolt $400
Solid trans mount $35
Spec stage 1 clutch $295
New radiator $175
Door hinge kit(not installed) $25
Solid rubber motor mounts $90
New motorcraft platinum plugs and wires $130
Less than 3000miles:
Cold air intake $70 (ebay but works great!)
Clear corners $40
Clear aftermarket headlights $100
Labor for rotors and pads $160
Pads and rotors all around $180
New alternator $130
Passed legit MD inspection
Undercoating has warranty until 2009
That’s adds up to about $5600 and the mostly just parts and some labor. I will even throw in a brand new never used car cover.
The bad stuff:
The return plenum needs replacement because I over tightened it and it cracked. I have the part and gasket to do the job. The driver side mirror is missing the glass and the passenger side broke somewhere inside the motor(frigin carwash!). So I have two used black mirrors ready to be installed. Now I’ve been told the car may need a new ecu but haven’t been able to find a shop that knows much about these cars. Also the radio and some other things such as keyless entry don’t work due to a fuse that keeps blowing.
I'd like the negotiating to start at $2000. Including the car, the labor, and all of the new parts I've spent about $8000 and can't aford to keep it or store it anymore. Thanx
Pics of the broken plenum:
http://www.sccoa.com/forums/attachment.php?attachmentid=23531&d=1163562046
http://www.sccoa.com/forums/attachment.php?attachmentid=23532&d=1163562209
I will get more pics and post them as I get them.
Within the last 500 miles: (I have receipts for just about everything I listed)
New 76mm mass air meter and brand new 02 sensor $250 for both
Oil Change with synthetic
Fuel filter change
New serpentine belt $35
New supercharger belt $25
New clutch master cylinder $125
New clutch slave cylinder $188
Custom down pipes $250
Modified v6 mustang headers with egr and new gaskets $200
New electronic shocks all around $500
Four wheel alignment $80
Used long block with less than 20,000mi installed with new upper gaskets and steam cleaned engine paid $900 for engine and $120 for gasket set $1200 labor
March underdrive Billet aluminum pulley set installed (ex alt pulley) $250
BHJ Harmonic balancer and bolt $400
Solid trans mount $35
Spec stage 1 clutch $295
New radiator $175
Door hinge kit(not installed) $25
Solid rubber motor mounts $90
New motorcraft platinum plugs and wires $130
Less than 3000miles:
Cold air intake $70 (ebay but works great!)
Clear corners $40
Clear aftermarket headlights $100
Labor for rotors and pads $160
Pads and rotors all around $180
New alternator $130
Passed legit MD inspection
Undercoating has warranty until 2009
That’s adds up to about $5600 and the mostly just parts and some labor. I will even throw in a brand new never used car cover.
The bad stuff:
The return plenum needs replacement because I over tightened it and it cracked. I have the part and gasket to do the job. The driver side mirror is missing the glass and the passenger side broke somewhere inside the motor(frigin carwash!). So I have two used black mirrors ready to be installed. Now I’ve been told the car may need a new ecu but haven’t been able to find a shop that knows much about these cars. Also the radio and some other things such as keyless entry don’t work due to a fuse that keeps blowing.
I'd like the negotiating to start at $2000. Including the car, the labor, and all of the new parts I've spent about $8000 and can't aford to keep it or store it anymore. Thanx
Pics of the broken plenum:
http://www.sccoa.com/forums/attachment.php?attachmentid=23531&d=1163562046
http://www.sccoa.com/forums/attachment.php?attachmentid=23532&d=1163562209
I will get more pics and post them as I get them.
Attachments
Last edited: