Help

fastscbird

Registered User
how the heck do i get the piolt bearing out. i have tryed everything from a come allong to a slide hammer

please help me
:mad:
 
A slide hammer with those hooked ends should do it. However, one old mechanics trick is to fill the shaft hole in the middle with heavy grease and then punch it with a suitable sized wood dowel - that will offen force the bearing out.
 
A metal rod would be best the same size as the input shaft heavy wheel bearing grease and a hammer or measure how thick the new one is mark a drill bit drill a hole in on both sides tap the hole with the appropriate sized tap screw bolts in evenly and it will push it out that is a last resort
 
Back
Top