View Full Version : Part Numbers for Blower Rebuild

09-21-2007, 12:24 AM
I searched around and the only thing I can find a part number on is the snout seal. I know I can buy the whole kit online, but I would like to do it this weekend and won't get it by then if I went that way.

Soooo, I would like to know the following:

Both bearings
Snout seal
Rear Bearings

Thaaannk Yoou...:)

09-21-2007, 01:04 AM
The seal is manufactured by Chicago Rawhide.
# 7968 (preferred) #7965 or #7966 can also be used.
Run between 20.54 2.42 Applied Industrial Tech.

The bearings are made by NSK. You will need one of each.
# NC6204C3X28
# NC6203C3X28

Loctite sealant
# 51831 Gasket Eliminator 518, 510, or 504 Found at Grainger

Husky pt # 00603
skf seal is 7966 cr 20x47x7 hms4 R
rear snout is skf 6204

09-21-2007, 09:47 AM
Thanks, Manny.

So I guess you can't get a coupler from anywhere other than online?

09-21-2007, 11:11 AM
i get my stuff from spinning wheels he is fair priced and saves me the work of buying from many sources heck he even gives you the oil and instructions.

you may save $20 finding it your self but time is money and i like the spinning wheels stuff

09-21-2007, 03:54 PM
I just tried calling him and he is not answering. I just wanted to get it done before I leave for the shootout on Thursday. Napa doesn't carry all I need so I need to order it.