Flex
Registered User
Here's the problem. I installed one in my car last night. These mothers are larger than the stocker so I had to modify the bracket a little by grinding away two sections.
After finally bolting it in place I start the engine to have the battery warning light come on. I looked at the two alternators side by side. The 3 pin connector rests in the same place but the power post is up and to the right of the connector vs the stock down and to the left. There is also another single pin socket to the right of the connector on the new alternator between the 3 pin harness and the post.
Has anyone used one of these? Any idea why the warning light is on? Could it be related to the empty pin connector?
After finally bolting it in place I start the engine to have the battery warning light come on. I looked at the two alternators side by side. The 3 pin connector rests in the same place but the power post is up and to the right of the connector vs the stock down and to the left. There is also another single pin socket to the right of the connector on the new alternator between the 3 pin harness and the post.
Has anyone used one of these? Any idea why the warning light is on? Could it be related to the empty pin connector?