Alignment

james5275

Registered User
Attention Certified Technicians!
Anyone understand these alignment printouts? I understand the parimeters envolved, just dont know which ones are which on this diagram. Thanks for the input!
jj
 

Attachments

  • LastScan.jpg
    LastScan.jpg
    34.2 KB · Views: 72
Looks like the "tires" are tilted in the direction of the reading. So, if the camber was negative, the would tlit with the top (front) towards the center of the picture. The toe looks like the circular arrow diagram, and I can't tell which is the caster. The triangular arrow heads are pointing to the side which is out of tolerance..

BTW, you have wayyyy too much tire grinding toe-in for a supercoupe. :cool:
 
all outta wack

Yea, this is actually not my SC, it's for my daily driver. I just got to thinking about alignments, and how the shops can make good money on those of us that dont understand suspension geometry. This shop tried nailing me for $90 plus $55 PER WHEEL to install alignment bolts to get everything squared up. Just thought I'd do some homework before I got screwed WITHOUT vaseline! Any other suggestions or ideas?
jj
 
Back
Top