Slave cylinder Kit?

matt59

Registered User
Does anyone know of a Internal type slave rebuild kit or a seal that will work?
I took the slave apart and it looks like a no brainer, The sealing ring is cracked and it is pretty simple to replace. I looked in the usual parts stores and there's nothing on a kit. I'm tight on funds for my SC repair so I want to do it as cheaply as I can get away with.
Thanks...
 
I don't believe anyone makes one specifically. If you have a local bearing house, you might stop by and see if you can work out which seals you need.
 
I did rebuild the slave cyl using a seal from a Ford Ranger.
A very simple repair once the tranny is out.
As long as the surfaces are not pitted or scratched it is can be done.
Mine has been good for nearly a year now.
 
Back
Top