PDA

View Full Version : SCAT H-Beam 6.2" rods. Singles or extras



Slysc
11-17-2007, 11:18 AM
I am looking for SCAT H-Beam rods 6.2" long with the 351W 2.31" crank/rod journal.

I have a pair that is left over from a set of 8 and I'm looking to put together 4 more. If you have any of these laying around. Please let me know.

Dan
248-709-6695

Randy N Connie
11-17-2007, 11:29 AM
If you do not have any luck finding extra rods to make up a set of 6.
Maybe you could start a group buy to make up the difference.

I have a set of 6 - 6.200 rods. but have no pistons/pins to go with
the 6.2 rods. I would be interrested in a group buy for pistons.

Thanks Randy

Mike8675309
11-17-2007, 11:50 AM
One thing to check is the size on the little end. All the Scat rods I saw in that length came with a .927 bushed pin bore. The factory piston is .912. You just want to be aware of that when ordering pistons.

Slysc
11-17-2007, 02:18 PM
Randy,

You can get a set of custom pistons from Diamond Piston for $600 with wrist pins and rings. They'll make them to order. No group purchase required.