PDA

View Full Version : Parting out 93 SC 5-speed Black - Black Int. *updated 3-20*



blue94sc
11-25-2007, 09:01 PM
I recently purchased a 93 SC for parts.
It is a black 5-speed that is stock with 118k miles.
The interior is black with cloth/leather upper seats.
What I do know of the car is that the motor is locked up (bottom end), the front corner markers, drivers fender and door are damaged. There are LED's out in the rear center taillights, drivers side rear corner is cracked, the rear bumper cover is split, and the front bumper cover has two 1/4" diameter holes in it.
I purchased this car for the 5-speed trans and some misc rear suspension parts. Pictures are attached below.

....UPDATE
I am down to a rolling chassis now and will be tearing into the suspension soon. This week I will be adding to the list.
The following parts are now available. More parts on the way as I remove and inspect them. If your looking for something let me know. As always I can combine parts for quantity and shipping discounts. Offers are welcome.
--->I accept Paypal.<---

Prices do not include shipping.
Tensioner - main $8.00 Sold
Tensioner - JS $5.00
Tensioner - SC $5.00 Sold
Supercharger $100.00 Pending rebuild
Supercharger Top $10.00 Sold
Intake Manifold $20.00 Sold
Balancer & Pulley $50.00 Sold
Jackshaft Pulley $5.00
Jackshaft Bracket $20.00 Sold
Accessory Bracket $20.00
DIS Module $20.00 Sold
Late Model Rims (all 4) $100.00 (one center cover is cracked)
70mm MAF w/sensor $20.00 Sold
K&N panel filter (cleaned & reoiled) $10.00 Sold
Air tube $5.00
Engine harness $30.00 Sold
ECM $50.00 Sold
Fuel rail $20.00
Fuel harness $15.00 Sold
Injectors $35.00 Sold
Intercooler $25.00 Sold
Upper IC Tube $10.00
Lower IC Tube $10.00
Intake plenum non-EGR $20.00
Return Plenum $20.00
Throttle body $15.00
T-stat housing $10.00
ARC Covers (set) $5.00
Seats Black cloth with leather upper (front & rear) $150.00 Sold
Instrument panel trim - black $10.00
Steering wheel - black $20.00
Carpet - black $20.00 Sold
Seatbelts - black (set) $20.00 Sold
Visors - black (set) $10.00 Sold
Rear corner light RH $10.00 Sold
Trunk lid - black $25.00
Trunk carpet $10.00
Trunk solenoid $10.00
Fuel door - black $5.00
Fuel door solenoid $10.00
Spare tire cover $5.00
Third brake light cover $5.00
Stock fuel pump & sending unit $25.00
Quarter glass $30.00 ea or both for $50
AC Accumulator $15.00
AC lines $30.00 for both
AC pump $25.00
Rear sway bar 23mm (includes frame bushings and clamps - no links) $25.00

Cheers!
Bill

90MaroonLX
11-26-2007, 01:22 AM
Mind shooting pics of the seats to [email protected]?


I'd be interested in the covers if you'd be willing to pull them off and ship them.

Thomas A
11-26-2007, 01:59 AM
Condition of E-brake handle?

Thomas

badfreakinbird
11-26-2007, 11:36 AM
Condition of the courtesy lights above back seat?

Thunder95
11-26-2007, 12:19 PM
Price on the seats, front and rear, the whole shebang. Shipped to 64052 - business address. WOuld like to see more pics as well.

Also a price on the wheels?

-Joel

blue94sc
11-26-2007, 01:18 PM
Hey guys.
I have more pics to upload but it got late.
When I get home tonight I will send off and post pics of the interior.
As for the other parts I will check on their condition and let you guys know tonight.
Thanx
Bill

blueblur89
11-26-2007, 05:31 PM
k&n panel filter price and shipping to 54913? thanks.

blue94sc
11-26-2007, 07:22 PM
Here's more pics...
Bill

blue94sc
11-26-2007, 07:34 PM
More pics below.
Bill

blue94sc
11-26-2007, 07:41 PM
more pics.. and PM's sent.
Bill

qbg6
11-26-2007, 08:03 PM
Interested in upper front A arms if the ball joints are in good shape

blue94sc
11-26-2007, 08:46 PM
Interested in upper front A arms if the ball joints are in good shape

I haven't got to tearing apart the front suspension yet. As far as I can tell they look like they are in good condition. But I won't know for sure until I remove them. Once I do I will let you know.
Thanx
Bill

customfabboy
11-26-2007, 08:59 PM
how much for the complete motor and wiring and computer? thanks

ecyrbh
11-26-2007, 09:54 PM
You have a PM,sir..Thanks

blue94sc
11-26-2007, 11:32 PM
how much for the complete motor and wiring and computer? thanks

At this time I am not confortable with selling the engine until I find out what is damaged with it. The engine is currently seized up. Once I know the extent of the internal damage I will post it accordingly.
Thanx
Bill

CanadianCoupe91
11-27-2007, 12:11 AM
How much do you want for the rear diff???

ThunderTurkey
11-27-2007, 06:23 AM
If your looking for something let me know.
Cheers! Bill

How about the gauge cluster? Actually, all I need is the Odometer and the boost gauge. So far, EVERY odometer I've bought has been broke! :(

Thunder95
11-27-2007, 10:35 AM
How about the gauge cluster? Actually, all I need is the Odometer and the boost gauge. So far, EVERY odometer I've bought has been broke! :(

Maybe you should just spend the $25 and put a new gear in it! :)

Prices on this stuff yet?

-Joel

blue94sc
11-27-2007, 01:46 PM
Hey guys.
Please be patient with me.
I work fulltime and my wife works in the evening.
So juggling three kids and keeping up with all of the inquiries is a little tough.
If there is something your interested in please let me know.
Sorry for not having prices yet but I have not had time to investigate what the parts are worth.
I don't plan on squeezing every penny out of everyone just fair prices.
My belief is that it's only worth what someone will pay for it.
PM's have been sent.
Thanx
Bill

ThunderTurkey
11-27-2007, 02:37 PM
Maybe you should just spend the $25 and put a new gear in it! :) -Joel
:rolleyes: "Yeah, I would except when I took ONE apart to see how it worked, THREE different wheels fell out of it, and TWO springs, which I never figured out HOW they went back together! :( I't a lot easier to 'plug and play' with the entire gauge and HOPE for the best. This cluster will make attempt #4 - oh well, cheaper than a new car!" :D

grateful_carl
11-27-2007, 03:24 PM
Maybe you should just spend the $25 and put a new gear in it! :)

Prices on this stuff yet?

-Joel

Where can you buy an odometer gear for $25? They are $50 on any site I can find them...and a pain to put in properly.

blue94sc
11-27-2007, 11:13 PM
Condition of the courtesy lights above back seat?

Here is an updated pic of the courtesy lights.
They are a little yellowed in the center.
Bill

blue94sc
11-28-2007, 09:49 PM
More parts.

d3016
11-29-2007, 12:01 AM
Hello:

Interested in the following parts:
-Sunroof Motor(if equipped)
-Radio Knobs for Bass, Treble, Balance, Fade
-Rear trunk Tail-lights(If no stress cracks)
-Emergency Brake Cables

Thank you for the time and look forward to hearing from you

blue94sc
11-29-2007, 12:10 AM
Hello:

Interested in the following parts:
-Sunroof Motor(if equipped)
-Radio Knobs for Bass, Treble, Balance, Fade
-Rear trunk Tail-lights(If no stress cracks)
-Emergency Brake Cables

Thank you for the time and look forward to hearing from you

Hello.
This car does have a sunroof but I am not sure if it works or not yet.
I haven't got to that area of the car yet.
As far as the reat of the parts, the car had an aftermarket radio, the LED's in the taillights are not completely functional, and the emergency brake system is inoperative. I don't know if the cables are in good shape or not. I know that you can get new cables from NAPA for around $20 a side.
Sorry that I can't help you out.
Cheers!
Bill

blue94sc
12-02-2007, 12:43 AM
Updated original post with available parts and prices.

blue94sc
12-08-2007, 10:57 PM
Lowered prices.
Bump

blue94sc
12-08-2007, 11:45 PM
Here a pic of the DIS as requested.
Bill

blue94sc
12-10-2007, 01:20 PM
Updated list and lowered more prices.
Bill

VicRattlehead
12-10-2007, 07:02 PM
can you get a pic of the dr seat. need to know if the dr side bolster is in decent shape.

blue94sc
12-12-2007, 02:47 AM
can you get a pic of the dr seat. need to know if the dr side bolster is in decent shape.

There is someone ahead of you that is interested in the seats.
If he decides that he is not interested I will let you know.
Thanx
Bill

pic of the seat anyway.

kenewagner
12-12-2007, 09:28 AM
I'll take the DIS module and the IC shipped to 68110. Do you take Pay Pal ?

Ken

blue94sc
12-12-2007, 01:48 PM
I'll take the DIS module and the IC shipped to 68110. Do you take Pay Pal ?

Ken

Hey Ken.
PM sent.
Bill

DMX
12-13-2007, 12:08 AM
Tensioner - main $8.00
Intake Manifold $20.00
Balancer & Pulley $50.00
Jackshaft Bracket $20.00
Accessory Bracket $20.00



I'm interested in these parts, do you take paypal?

blue94sc
12-13-2007, 02:49 AM
I'm interested in these parts, do you take paypal?

Hello.
Yes paypal is accepted.
I will update my main post to reflect this.
PM is sent with my ID.
Thanx
Bill

blue94sc
12-18-2007, 02:32 AM
Wiper assembly pics as requested.

d3016
12-19-2007, 02:16 AM
Hey Bill!

I need a passenger side seat belt track and motor assembly. How much shipped to 89074?

Thanks

blue94sc
12-19-2007, 01:58 PM
PM sent.
Thanx



Hey Bill!

I need a passenger side seat belt track and motor assembly. How much shipped to 89074?

Thanks

fomocoman
12-20-2007, 04:46 PM
PM sent on some more parts. Thanks...

mgdtbird
12-20-2007, 07:34 PM
I am looking for a proportioning valve?? Thanks.

blue94sc
12-20-2007, 10:24 PM
I am looking for a proportioning valve?? Thanks.

Are you referring to the valve on the brake master cylinder or the interconnection block mounted at the front of the drivers side fender?
LMK
Bill

T-BIRDS281E
12-21-2007, 02:11 AM
How much shipped for the complete clutch pedal assembly slave cylinder and everything up to the tranny?

mgdtbird
12-21-2007, 12:56 PM
interconnection on the drivers fender, found one though somewhere else. Thanks

blue94sc
12-21-2007, 01:53 PM
How much shipped for the complete clutch pedal assembly slave cylinder and everything up to the tranny?

Just to verify, you need the pedal assembly, master cylinder, hydraulic lines, and the slave cylinder?
LMK. In the meantime I will check on their condition.
Bill

T-BIRDS281E
12-21-2007, 03:17 PM
Just to verify, you need the pedal assembly, master cylinder, hydraulic lines, and the slave cylinder?
LMK. In the meantime I will check on their condition.
Bill

Yes thats correct.

blue94sc
12-22-2007, 01:00 AM
Yes thats correct.

Cool.
Saturday I will try to get these parts out and look them over.
I believe that they worked fine before I tore into it.
Once they pass my inspection I will send you a PM with verification.
We can go from there on price.
Cheers!
Bill

T-BIRDS281E
12-22-2007, 05:13 AM
Cool.
Saturday I will try to get these parts out and look them over.
I believe that they worked fine before I tore into it.
Once they pass my inspection I will send you a PM with verification.
We can go from there on price.
Cheers!
Bill

Sounds good!

blue94sc
01-05-2008, 02:01 AM
Updated list and lowered a few prices.
I have not had any luck removing the hydraulic clutch line from the trans yet.
Tomorrow I hope to have more parts to add to the list.
Happy new year everyone.
Bill

lx2sc
03-18-2008, 10:03 PM
how many miles on the ca i need a 2.73 trak lok pumpkin in good shape how much shipped Thanks

quicktsi
03-18-2008, 11:26 PM
What kind of condition is the dash in?

blue94sc
03-19-2008, 01:04 PM
What kind of condition is the dash in?

I believe that it is in good shape (at work right now).
I'll post pictures of the dash when I get home this evening.
Thanx
Bill

blue94sc
03-19-2008, 11:48 PM
What kind of condition is the dash in?

Here are pics of the dash.
I have the other pieces that go around the steering wheel.
Everything looks in really good shape for the cars age. No cracks.
There is a sticky spot on the passenger side (see pic) where an air freshener was placed. It will probably come off with a little WD40 or something. It's still gummy.
LMK if your interested.
All the best!
Bill

blue94sc
03-19-2008, 11:56 PM
how many miles on the ca i need a 2.73 trak lok pumpkin in good shape how much shipped Thanks

The car has 118K miles.
I plan on getting it out this weekend.
There doesn't appear to be any leaks around the axles and front pinion.
Once it's out I will verify the ratio and inspect it closer to make sure there is nothing wrong with it.
I'm asking $75 + shipping.
But I will need your zip to confirm shipping cost.
I can ship FedEx through work for a discounted rate. Even better to a business address if you have one.
Cheers!
Bill

quicktsi
03-20-2008, 12:11 AM
How much for the dash shipped to 73099?

nightcoupe
03-20-2008, 02:35 PM
did the seats sell? if not let me know at infoserv @ edge.net thnx

blue94sc
03-20-2008, 09:43 PM
How much for the dash shipped to 73099?

PM sent with shipping estimate.
Bill

blue94sc
03-23-2008, 12:59 PM
Here's a pic of the passenger panel from on top of the dash showing the two outer posts which are broke.
Bill

pickel69
04-14-2008, 05:13 PM
i am wondering if you have the proportioning valve still i am trying to find one mine is shot if you have it how much and how much to ship it to toledo ohio

PHATBRD
04-14-2008, 05:22 PM
do you have the headliner with moonroof shade?
i assume its black...good shape? PIC?
how much and shipping to 48313


thanks!

blue94sc
04-16-2008, 12:55 PM
i am wondering if you have the proportioning valve still i am trying to find one mine is shot if you have it how much and how much to ship it to toledo ohio

Hello.
Sorry for the delayed response. I have been really busy with other things lately. I believe that I still have the proportioning valve. I am located in Toledo as well. So I can ship it to you or you are welcome to stop out to pick it up if you like. $10 and it's yours if you pick it up, shipping would be additional. Just let me know.
Thanx
Bill

blue94sc
04-16-2008, 12:56 PM
do you have the headliner with moonroof shade?
i assume its black...good shape? PIC?
how much and shipping to 48313


thanks!

Hello.
The headliner has already been sold, and the sunroof shade is currently on hold for someone until I have a chance to remove it.
Thanx
Bill

Charles G
10-13-2011, 10:24 AM
If so will buy passenger side rear qtr panel and window, and black door skins. Thanks Charles Cell 617 803-9662

nmcbchief
10-13-2011, 10:26 AM
Check out the post dates before you ask for parts. This thread is 3 years old.