Removing hub from nuckle

PSYANIDE

Registered User
so i've been trying to press out the hub from the nuckle for the last 1.5 hours with no luck, can anyone point me in the right direction? is there a walkthrough posted anywhere? am i doing something wrong? is there some secret voodoo ritual i need to do for it to come out? :D

ive tried heating it but nothing... any help would be great
 
r u trying to take the spindle off from the knuckle ?

my driver side came out no problem but the pass. side i had a 2 ft breaker bar on it, pb blasted the hell out of it, and even put an impact gun on it and nothing.

my next step is gonna be puting a torch to it.
 
turns out the seals on the press are bad which explains why i was only getting about 5 tons max. took it to a shop around the corner and they got it no problem.

thanks for the replies tho!
 
r u trying to take the spindle off from the knuckle ?

my driver side came out no problem but the pass. side i had a 2 ft breaker bar on it, pb blasted the hell out of it, and even put an impact gun on it and nothing.

my next step is gonna be puting a torch to it.

He's removing the hubs from the knuckle so that he can use Mustang wheels and brakes. Spindles are in front, knuckles are in back on our cars.
 
Back
Top