PDA

View Full Version : supercharger need help!



hotrodseanxx
01-05-2008, 12:58 AM
hi,
I have a 1993 thunderbird with the 3.8v6 but it did not come with the supercharger... everything is stock on the car and is in mint condition and only has 72,000 miles...

I wanted to know if it was possible and how hard it is to add on the stock supercharger that the SC came with.

thanks

CurtisPaulfrey
01-05-2008, 01:05 AM
The bottom end will not hold, plus I have been told you need a ton of parts.....

Ddubb
01-05-2008, 01:13 AM
You'll be better off selling the 3.8 Tbird and picking up a Super Coupe if you wanted the SC 3.8.

- Dan

Flex
01-05-2008, 08:31 PM
If you are going to go through that much grief, you are better off buying a centrifugal and putting it on your LX. It will work with the stock motor without blowing it apart. There is a guy selling a procharger setup on one of the boards for $1200.

MN12Racing
01-06-2008, 09:42 PM
You need the entire engine. You're better off working with your motor.
www.tccoa.com has more 3.8LX guys.

92bird
01-07-2008, 10:31 PM
It won't even bolt it on. The jackshaft bracket that drives the supercharger hits the distributor. If you have a 96-97 3.8L LX T-bird then it would bolt on because they have EDIS (electronic distributorless ignition), but you would need larger injectors and a major re-tune on the EEC (SCT chip or the like)

But since you have a '93 3.8L base, you're sorta out of luck unless you swap the whole SC wiring harness and engine and computer in.

Go look at www.v6power.net... That is the site for v6 mustangs that have the same engine you do pretty much.

I would love to see someone do this swap to a '96-'97 LX since that body style never came supercharged :)

Jeramie