Ben999_
Registered User
I just got a Hurst t-handle shifter from ebay. From what I've read the shifter thread is the same as a mustang, 12mm x 1.75. Now when I put in the B&M shifter yesterday I noticed in the instruction sheet that it says the thread is 12mm x 1.25 (See second page - http://www.bmracing.com/media/products/pdf/50.pdf). I know it should be the mustang thread but my problem is that the adapter for both the mustang thread and the 12mm x 1.25 do not thread into my shifter handle. I don't want to force it on there, because I don't know if I'll be able to get the stock knob back on. Has anyone else had a problem using the Hurst handle? It's this one - http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_953676_-1