While the coating is good to help blower efficiency, some of the guys recently starting noticing this coating sitting in their intercooler. Some feel its because of the amount of OD'ing they are doing and the coating is peeling off with the heat and rpm's.
I believe since then Charles has tightened up the tolerances on the MPX case to use non coated roaters because of this issue.
yes they will work but you do have to relocate one of the line up dowels on the gtp rotor pack as thery are in diagonal locations where as on the sc case the dowels are located at the top corners.
yes they will work but you do have to relocate one of the line up dowels on the gtp rotor pack as thery are in diagonal locations where as on the sc case the dowels are located at the top corners.