PDA

View Full Version : Warning Chime Module



txsc
01-14-2008, 11:12 PM
I need a known good warning chime module for my 89. The P/N is:

E7DB 10D840-AA

This is the module with the single-row connector. Advise cost shipped to 78154.

Thanks!

JD

Mike Puckett
01-22-2008, 09:37 PM
I found my chime module if you're still in need.

txsc
01-23-2008, 03:46 PM
I found my chime module if you're still in need.

Already got another one, and it turned out not to be the problem. Thanks anyway!

JD

kpatton
01-23-2008, 04:53 PM
I sure what to know what the solution is TXSC. Please post the solution.

txsc
01-23-2008, 09:49 PM
I sure what to know what the solution is TXSC. Please post the solution.

Well, I really don't know if I'd call it a "solution" or not. Here's the thread from up on electrical:

http://www.sccoa.com/forums/showthread.php?p=705303#post705303

The bottom line is that I could find nothing wrong with any of the components. But, after disconnecting everything for testing, and then reconnecting, the problem was "solved". It seems to be fine now. But, because I didn't find a discrete problem, I can't be too proud about fixing it. More luck than anything...

JD