"Change Now" light has been on for 4 years on my 93...exactly how do you reset it ?
David
Are you being serious??
Anyway for HI-OUTPUT turn the key to the run position, i dont know if it matters if you start it or not. Within 15 seconds put a paperclip into the small hole next to the lcd and hold it in, the display will start to flash. When the display stops flashing you can let go of the paperclip!!
It's covered in the owner's manual. The procedure listed above is correct, but you need to have the key on with the engine off. Won't work otherwise.
JD
Thanks for the info.
David
LOL.. you kiddin me man.. Key-on to run position but don't start the engine, push paper clip in the hole on the left and hold for 5 seconds. Ignore the beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee from the warning chime."Change Now" light has been on for 4 years on my 93...exactly how do you reset it ?
David
lol, david out of anyone should know!!
for once i feel smart
lol, david out of anyone should know!!
for once i feel smart
On the 93 models you don't even need a paperclip....just push and hold the little black button until it flashes.