PDA

View Full Version : M5r2



VINCES
01-18-2008, 01:12 PM
Anyone in the Eastern PA area have an extra, good working order 5-spd?

Let me know, thanks.

MadMikeyL
01-18-2008, 02:11 PM
If you feel like replacing some synchros, I have one in NJ that needs 2nd and 3rd gear synchros. Give me $50 and come pick it up if you want it, or I could maybe meet you somewhere half-way if you want. Let me know.

Mike

VINCES
01-18-2008, 02:14 PM
I'm not sure what's wrong with mine, and i was exploring the possibility of buying a working used one, over rebuilding right now. thanks

MadMikeyL
01-18-2008, 05:27 PM
No problem. I did the same thing, and now I have the one that I pulled out of my car sitting at the shop, with no real use for it. I figure if someone can use it, great, but if not I might have it rebuilt eventually.

joshbea6
01-18-2008, 05:29 PM
MadMikey,

Any idea what the cost of shipping that trans to 43110 via Greyhound would be? Mine needs shift forks, and nobody makes shift forks for the M5R2 yet that I know of.

Josh

MadMikeyL
01-18-2008, 05:41 PM
Well the problem with greyhound is there aren't any greyhound shipping depots near me. The closest one is in newark, which is about an hour away, and I prefer to avoid going to newark, so the next closest one is about 1.5 hours away. I'll have to get some measurements and then I can see what it would cost to send it via DHL or fedex, but based on having shipped a trans before, I think it was close to $100 to send. Are you in a hurry to get these parts? Cause if you only need the shift forks, I could pull the trans apart and send you just the parts that you need to save on shipping. Only thing is I have a bunch of stuff keeping me busy right now, so it would probably be a couple weeks before I can get around to stripping it down.

joshbea6
01-18-2008, 09:29 PM
That would be AWESOME! I need all of the forks as I was told that aside from the synchro's, that all of my forks were shot.

Josh

pock1
01-19-2008, 01:20 PM
i have 1 from my 89 sc 5 speed in good shape. worked well before pulled in october .thx tony.

Ken Seegers
01-21-2008, 10:27 AM
I have one still in the car.....it needs to be pulled. It has new slave cylinder in it.

I live 20 mins west of philly.
Thanks
Ken