PDA

View Full Version : what year super charger is a better one 94? to put on my 92



shawpdx1
01-20-2008, 08:52 AM
I have a 92 i think I read that the 94 produced more HP, how much more will I get? . Also IM looking for a 140 speedo cars and years that I could look for at the junk yard thanks

chadder1313
01-20-2008, 10:43 AM
The 94-95 blowers are better than the 89-93 blowers. The 140 speedo guages are found in the 94-95s also.

mannysc
01-20-2008, 05:23 PM
hell dont buy a new blower port your early one and be happy .

Hock
01-20-2008, 10:00 PM
hell dont buy a new blower port your early one and be happy .

What would your recomendation on porting be?

mannysc
01-21-2008, 12:30 AM
do the vee 1/4 inch wider like S port and open up oval to half the thickness on inlet orsend case to me i can make it any style .

or doit at home I can send you templates to port your self .

heck a 94- 95 blower willcost you what i charge to convert yours to mpiii style including the intake plenum.

mywhite89
01-21-2008, 12:52 AM
do the vee 1/4 inch wider like S port and open up oval to half the thickness on inlet orsend case to me i can make it any style .

or doit at home I can send you templates to port your self .

heck a 94- 95 blower willcost you what i charge to convert yours to mpiii style including the intake plenum.

pm has been sent:)

chadder1313
01-21-2008, 10:30 AM
you also have another pm.

David Neibert
01-21-2008, 11:42 AM
94/95 supercharger is better, maily because of larger and better positioned inlet. You will also need the inlet plenum.

David

Ddubb
01-21-2008, 12:37 PM
The 94/95 also has coated rotors.

- Dan

kenewagner
01-21-2008, 02:24 PM
Theres one in the parts forum. 300 bucks is a great deal for the blower and plenum

Ken

89XR7TD
01-21-2008, 10:34 PM
do the vee 1/4 inch wider like S port and open up oval to half the thickness on inlet orsend case to me i can make it any style .

or doit at home I can send you templates to port your self .

heck a 94- 95 blower willcost you what i charge to convert yours to mpiii style including the intake plenum.

Did you say you can turn an early style blower into a MP111? Maybe we can do business:D, got 1 layin around that needs rebuilding also if you don't mind.

Tom

mannysc
01-22-2008, 01:54 PM
yes i can and the coated rotors that everyone says are so great are not used on thempx why if they are so good because you can do same thing by coating the case that dont turn and flake off because of centrifical force ahd heat