Superchared_SIx
Registered User
Now that I have a massive clunk in the front end, I figured it's time to tackle the front.
I have already swapped to the 94 spindles and added 13 inch cobra rotors.
Last spring I installed Tokico ARC shocks front and rear with poly mounts, Eibach springs with new poly cups, Rear outer poly kit, addco 1 1/4 " bar with poly bushings and short links, tranny mounts and diff mounts.
I want to install a larger sway bar and replace every thing.
Im just wondering what size bar I should go with to match the rear ? Also im wondering what recomendations every one has for bushing in the front ? As well I have seen alot of bashing of the poly bushings should I ditch the poly stuff I have or stick with it?
If it helps at all im riding on 18 x 9 rims with 245/45 front and 275/40 in the rear.
I have already swapped to the 94 spindles and added 13 inch cobra rotors.
Last spring I installed Tokico ARC shocks front and rear with poly mounts, Eibach springs with new poly cups, Rear outer poly kit, addco 1 1/4 " bar with poly bushings and short links, tranny mounts and diff mounts.
I want to install a larger sway bar and replace every thing.
Im just wondering what size bar I should go with to match the rear ? Also im wondering what recomendations every one has for bushing in the front ? As well I have seen alot of bashing of the poly bushings should I ditch the poly stuff I have or stick with it?
If it helps at all im riding on 18 x 9 rims with 245/45 front and 275/40 in the rear.