90 sc swap to a 99 3.8 help

99blackmamba

Registered User
have found alot of info on pre 99 swaps.
im not sure what is different frompre 99.
does any one have any links or helpful info?
any help would be apprecated.

thanks
 
I think in 99 they went to the split port heads which would mean you couldn't bolt an SC intake to the heads due to the intake ports being located in different spots.



Jay
 
Bolt in place yes. Wiring will be your challenge. Along w/ IC placement, blah blah blah. As far as "Bolt in replacement" no.
 
Dont quote me, but i would say yes. The SN-95 stang is very similar if not exactly the same as the New Edge, so i dont see it being terribly different.
 
How much was the car? Do you already have an SC motor?

I think that the later cars have a larger bay so it should not be a problem physically but as 351cat said wiring it up will be the painful part.

You will have to do some modding to add the intercooler and I know that positioning of the brake lines is a problem on the SN95 platform. One of the guys on V6 power solved that with a revised mc though and it is posted in recent supercoupetech there.

I saw one on Ebay a few months back so obviously it is possible.
 
Back
Top