barrieguy
02-27-2008, 11:01 PM
Well here's the parts I have acquired or already have on the car:
17" chrome cobra r's - on the way now
eibach 1-1/2" lowering kit - also on the way now
3" CAI with fender mounted cone
borla dual 2-1/4" X 3" res. with high flow cats and custom down tubes - have the parts it's got to go to the exhaust shop to be fabbed up (I may try it with no mufflers at the rear, just the resonator)
frpp aluminum/urethane mustang (bullit or mach 1 i think) pedals
cobra leather shift knob
5% OD pulley
NR auto white face gauge kit
autometer boost&volts phantom gauges with dual pillar mount
b&m ripper shifter
leather interior - have everything just need time to swap
frame connectors, front and rear strut tower braces - being fabbed now
3/4" raised top - looking, I bought some 3/4"cnc cut alum. spacers so I am going to try to fab up my own out of a stock one
3.73 pumpkin - considering???
93 front and rear brake setup (spindles, etc) - just need time to install
cross drilled rotors - sourcing now
tint - spring
That's the plan for now, I'm not looking for major power/speed just something adequate that I can take out on the weekend (that is if I can sneak away from work long enough, although the OT is paying for the parts, so....).
Let me know what you guys think, is there anything that I'm missing from this basic power package (remember basic, I'm on a budget)?
Thanks, Trevor
Pics aren't mine but the color and rims are the same.
17" chrome cobra r's - on the way now
eibach 1-1/2" lowering kit - also on the way now
3" CAI with fender mounted cone
borla dual 2-1/4" X 3" res. with high flow cats and custom down tubes - have the parts it's got to go to the exhaust shop to be fabbed up (I may try it with no mufflers at the rear, just the resonator)
frpp aluminum/urethane mustang (bullit or mach 1 i think) pedals
cobra leather shift knob
5% OD pulley
NR auto white face gauge kit
autometer boost&volts phantom gauges with dual pillar mount
b&m ripper shifter
leather interior - have everything just need time to swap
frame connectors, front and rear strut tower braces - being fabbed now
3/4" raised top - looking, I bought some 3/4"cnc cut alum. spacers so I am going to try to fab up my own out of a stock one
3.73 pumpkin - considering???
93 front and rear brake setup (spindles, etc) - just need time to install
cross drilled rotors - sourcing now
tint - spring
That's the plan for now, I'm not looking for major power/speed just something adequate that I can take out on the weekend (that is if I can sneak away from work long enough, although the OT is paying for the parts, so....).
Let me know what you guys think, is there anything that I'm missing from this basic power package (remember basic, I'm on a budget)?
Thanks, Trevor
Pics aren't mine but the color and rims are the same.