remote water pump block off

[Kevin Leitem]

this is the first one i made for my car. when i tapped the 3/4 NPT threads the tap was a little crooked. not bad but i decided to make another. this makes it nice to make more room and to free up HP

here is the likn to the pic. http://www.sccoa.com/forums/attachment.php?attachmentid=30483&d=1202066669

it is made from 3/8 aluminum asking 50.00

[Kevin Leitem]

still for sale

[Kevin Leitem]

sold, but i can make more if anybody is interested

100.00 for polished
65.00 for unpolished

[BLOWN38]

Kevin, how do you hook the lower rad hose to the 2 fittings on the block off plate? I have a emp electric pump inline in the lower rad hose.

How long would it take you to make one of these for me unpolished? I have a drag day on april 12th.

[Kevin Leitem]

Kevin, how do you hook the lower rad hose to the 2 fittings on the block off plate? I have a emp electric pump inline in the lower rad hose.

How long would it take you to make one of these for me unpolished? I have a drag day on april 12th.

i never gave a thought with an inline pump, my remote pump has 2 outlets . i suppose yo can get a y block and run your inline and split it into 2 . I don't have any 3/8 aliminum right now, i would have to order it , but i would have it done in a day or 2 after i get the aluminum.

[BLOWN38]

Think i'ma figure something else out for now. I'll let you know if i need one.

[Kevin Leitem]

Think i'ma figure something else out for now. I'll let you know if i need one.

not a problem, i will order some aluminum anyway just to have in stock