procedure for removel of antenna?

Assuming it is simialar to the 94-95's, it is a pretty easy procedure. I just replaced mine. It only has two nuts holding it on. To make it easier on yourself, you will need to remove the passenger front wheel and inner fender guard. You should be able to see the antenae, it has one small gold nut holding it near the bottom of the chassis. Then you will just need to remove the collar nut on top on the fender securing the antenae. Assuming it is still stock, you will then just need to disconnect the factory plug and antenae cable to swap them out.
 
Thats pretty much it but the wiring needs to be disconnected inside the R/H kick panel. I just replaced mine with a manual antenna from a Taurus, fit perfect.
 
Back
Top