PDA

View Full Version : 94-95 SC Cluster, No speedo needed!


getblown
03-17-2008, 07:14 PM
I just need a 95 SC cluster without a 145 speedo, I dont have one, but I dont need one. What I really need is the mother board off of the back of it, intact.

I have an aftermarket boost guage setup and need a volt meter and want the volt meter where the stock boost guage is.

For this I need a 95 LX with volt on top and fuel on bottom (earlier were switched), 95 SC mother board with a hole setup for the ARC light (there is no hole on a 95 LX cluster) and then to play mix and match.

*Quick thought, would this work or did I just hit a dead end?

jOe

Ddubb
03-17-2008, 07:19 PM
Joe,

I have a cluster here .. no lens, no 145 speedometer or Tach. Came out of a 94/95 SC .. so it has the boost gauge ... but as for the hole youre asking about - you mean the one right below the tach ??? On this 94/95 SC cluster, the printed circuitboard on the back does not have an open slot for the lightbulb either. I checked another one, and it has the lightbulb .. may not be on every 94/95 SC Cluster, but they arethe same circuit board and part number .... weird.

- Dan

x182dan
03-18-2008, 06:17 PM
I have a stock cluster out of my 94sc. I sold the gauges out of it but I still have the complete mother board I can let it go for cheap.
Dan