Suspension Technique Lowering Springs

fastsc92

Registered User
I have a set of lightly used Suspension Technique Lowering springs. These fit 89-97 T-birds. They lower the car 1.5" on all corners. These springs are of the linear design and offer cold wound steel that is powder coated for a lifetime of protection. The front spring rate is 432 lbs per inch and the rear spring rate is 631 lbs per inch with a freelength of 14.33 in front and 10.89" in the rear.

Springs are used but show little or no wear or marks. Powder coat is NOT flaked off. I also have the original paperwork. Any questions feel free to ask. Pics are with the springs installed on the car a few years ago with stock size rims and tires.

$200 shipped(depending on location)

IMG_0685.jpg

sc3.jpg

sc2.jpg

sc1.jpg
 
Back
Top