PDA

View Full Version : Parting out 93 SC.



Flip
03-24-2008, 08:20 AM
Purchased Billy’s 93 this weekend and will be parting it out if anybody local needs anything.
Will be putting some stuff on the Main parts area in a couple of days.
Nice Black Leather interior. (Front seats are going in my E150 cargo) Car only had about 98K in it.
Lot's of after market / mods on it.

Gregthespy
03-24-2008, 09:06 PM
Hmmm.... Lord knows I don't NEED anything, but... I'm going to keep it in mind.;) any idea what the wear on that clutch is if you don't have plans for it. I know my pilot bearing is going out in a matter of time and if the tranny is comming down something newer is going in.

I'm trying to resist but you may recieve a PM sometime inquiring further about these mods.

The Vulture:D

Flip
03-24-2008, 09:20 PM
Greg,
The clutch is MIA at this time. Hope it will turn up soon. Thought you had a Spec?? The trans was to be good, a little stiff but no grinding. Which might be the pilot bearing. Have a fresh block bored 20 over in the bag if you need project.
Have a 5-speed griffin, underdrives, KB braces, 2 sets of Cobra R's and tires, etc..
Flip

garsc
03-24-2008, 10:10 PM
How about the tail panels does it have good LEDs?

Flip
03-25-2008, 07:33 AM
How about the tail panels does it have good LEDs?

I believe it does, I will try and check them out soon.

the-big-e
03-25-2008, 01:27 PM
What color.....

Flip
03-25-2008, 01:30 PM
What color.....

Black on Black

the-big-e
03-25-2008, 03:16 PM
What shape are the bumper covers in.....

How close are you to Clearwater......

Flip
03-25-2008, 03:28 PM
Back one is shot and the front one is cracked on the drivers side. So not too good. Just towed by Clearwater on Sunday. About 90 miles or so from there.

garsc
03-25-2008, 05:30 PM
I believe it does, I will try and check them out soon.
Pm me when you get a chance, mine look good but the LEDs are out. Garry

SuperChicken89
03-26-2008, 10:35 PM
Flip.... I may have to come by and check a few parts out. I need a few interior trim pieces.

Bryan

Flip
03-27-2008, 07:29 AM
Flip.... I may have to come by and check a few parts out. I need a few interior trim pieces.

Bryan

Bryan,

Sure, or I could take some pics and e-mail to you. Most of the interior (black) is in great shape.

Flip

the-big-e
03-27-2008, 01:43 PM
Bummer on the covers......:rolleyes:

Is the dash in good shape and does it have the slider cover on the passenger side.....

Flip
03-27-2008, 02:08 PM
Bummer on the covers......:rolleyes:

Is the dash in good shape and does it have the slider cover on the passenger side.....

The dash is in super shape. It's a 93 which does not have the slider on the pass side.

SC Tuner
06-09-2008, 08:17 PM
Do you happen to have the drivers inside pull handle and power window and door lock button cluster? I need both, in black, if possible :)

Flip
06-09-2008, 08:44 PM
He sold the door panels before I bought it.

Sweet90SC
06-25-2008, 07:55 PM
Hmmm.... Lord knows I don't NEED anything, but... I'm going to keep it in mind.;) any idea what the wear on that clutch is if you don't have plans for it. I know my pilot bearing is going out in a matter of time and if the tranny is comming down something newer is going in.

I'm trying to resist but you may recieve a PM sometime inquiring further about these mods.

The Vulture:D

Yea my pilot bearing went out too...:(