Griffin Aluminum Radiator w/o trans cooler - 5-speed

Flip

Registered User
Used Griffin from a 93 5-speed SC. Used for only about 1,000 miles, but has had a hard life.

Was sold by the previous owner who poorly packed it and was damaged on the top cap area and the top hose connection. I bought his SC and all parts a while ago.

I took the Radiator to a local repair facility that does Aluminum radiators and they reworked the hose outlet and did a pressure check that is passed without a problem. It was decided to leave the top bent down as they felt it did not hamper the function of the radiator and would leak if it was pulled out.

The overflow hose goes on.

Did my own pressure check and it held pressure.

Some fins are dented but have straightened them out as much as possible.

The Griffin cap does leak and needs to be replaced.

Have a couple of other photos if you PM your e-mail.

I have one on my SC and it works fantastic in the summer down here.

Goes for over $500 new plus shipping.

$400 shipped to the lower 48.
 

Attachments

  • P3310045 (Large).JPG
    P3310045 (Large).JPG
    148.2 KB · Views: 126
  • P3310049 (Large).JPG
    P3310049 (Large).JPG
    130 KB · Views: 114
  • P3310047 (Large).JPG
    P3310047 (Large).JPG
    117.7 KB · Views: 86
  • P3310044 (Large).JPG
    P3310044 (Large).JPG
    97.1 KB · Views: 112
  • P3310043 (Large).JPG
    P3310043 (Large).JPG
    96.7 KB · Views: 99
couple of other photos
 

Attachments

  • P3310048 (Large).JPG
    P3310048 (Large).JPG
    120.4 KB · Views: 77
  • P3310050 (Large).JPG
    P3310050 (Large).JPG
    125.3 KB · Views: 97
Did you try this will a double IC? Have one from Ken Wagner, but had to modify the stock hanger to get it to work, but dont want to have to do the same with this radiator to get it to work.
 
No I haven’t, but I have been planning on getting one of Ken’s DIC in the future for mine with the griffin. You might have to do a small modification to the front alum rail for the DIC. Not sure how involved it would be but it can’t be too bad.
 
Thanks,
I have one other offer of $300 for it, I'll keep it in mind.

Thanks,
flip
 
Rad

OK, dont wait to long , I can send a pay-pal payment to ya , today . OK, WILL GO 350 SHIPPED . Thanks, DW
 
Last edited:
Back
Top