joshbea6
04-14-2008, 12:26 PM
What I have for sale is the following:
1990 SC Block with the following done to it:
1. cleaned and pressure checked for cracks
2. bored and honed for 3.5" pistons
1990 SC Heads with the following done to them:
1. cleaned and pressure checked for cracks
2. new valve seats installed
3. disassembled
1990 Intake and crank
1. cleaned and checked for cracks
1990 M5R2 Trans
1. was told that it needs new shift forks (good forks included)
2. needs synchro's and blocking rings (shifted fine, just popped out of 3rd gear while driving.
Have over $600 in the engine prep by a reputable local engine speed shop that specializes in forced induction motors.
Make me an offer.
1990 SC Block with the following done to it:
1. cleaned and pressure checked for cracks
2. bored and honed for 3.5" pistons
1990 SC Heads with the following done to them:
1. cleaned and pressure checked for cracks
2. new valve seats installed
3. disassembled
1990 Intake and crank
1. cleaned and checked for cracks
1990 M5R2 Trans
1. was told that it needs new shift forks (good forks included)
2. needs synchro's and blocking rings (shifted fine, just popped out of 3rd gear while driving.
Have over $600 in the engine prep by a reputable local engine speed shop that specializes in forced induction motors.
Make me an offer.