MpII polished inlet plenum fs

[mywhite89]

I have a polished Magnum Powers inlet plenum from a MPII supercharger for sale, looking for $400 shipped but open for offers. This is one of the best upgrades to the inlet side for a supercoupe. This plenum measures 85mm where it mates to the throttlebody.

I will throw in a Payton fabricated 3.5" air intake tube with silicone couplers and hose clamps for free, NO filter included for the person who offers $400 shipped!

Check this picture to see both items, the payton intake tube, the air vent hole was cut in the wrong location but will still work. You can see how the hose was attached high to the tube in my pic!
Pic--->http://www.sccoa.com/forums/attachment.php?attachmentid=28919&d=1192758336

If you require better pictures let me know, but this is pretty straight forward. My car made 334rwhp and 400rwtq with these two items being part of the fun!

Chris Homan-tbirdowner302@yahoo.com
Couple pictures to start you out, more to come.

[mywhite89]

Pictures my Friends-These compare the stock 89 plenum to the MPII plenum. The MPII plenum is a great upgrade for anyone with a 94-95 blower. You can use from stock up to 85mm throttlebody with this plenum. I'll send you the MPII case to copy the port job if you want. The case may still be usable, but not by me. So throw that in too.

[Andrew89SC]

pm+email sent.

[mywhite89]

back at ya Andrew

[Andrew89SC]

paypal sent.

[thunderkid84]

so it it sold ?

[mywhite89]

Yes, inlet and cai have been sold and shipped.