Mustang Headers

[MSG419]

I have a set of Mustang Headers that I was going to use, but no longer need. The collector on the drivers' side has been cut and rotated to fit ac SC. They are also heat wrapped.

PM or email me - msg419@aol.com and I will send pics. Mine are too big to post here.

Asking $125 shipped to lower 48. I accept Paypal, money order or check(must clear prior to shipping).

Willing to meet you if local to NYC.

Thanks,
Mark

[MSG419]

If interested in these headers, make an offer. May put them on ebay in a day or two.

Thanks,
Mark
'95 SC 5spd

[NH89SC]

You have a PM.

[joker77_2005]

still available?
mike

[95MustangSC]

if you want a stock set of mustang headers ill sell mine $50 plus shipping

[MSG419]

Mike - Headers are still available.

Yes, stock mustang headers can be purchased for less - but these have had the collector cut and turned to clear the SC steering column. If you want to sell your headers, start your own thread.

[joker77_2005]

will these bolt right up to the stock downpipes?i have been reading up on these and cant seem to read a clear answer
mike

[Pablo94SC]

will these bolt right up to the stock downpipes?i have been reading up on these and cant seem to read a clear answer
mike

No. The stock downpipe is too small of a diameter and I believe it's not in the right location.

[MSG419]

Stock downtubes will not bolt up to the mustang headers. you should be changing the exhaust anyway to open it up so the headgaskets don't blow.
Most SC'rs go to a 2.25" pipe to the resonator, then a 3" single center and split to the mufflers using the 2.25" pipe. Or if running true dual exhaust
2.25" all the way.

The driver's side of the mustang headers has had the collector cut and turned so it will clear the SC steering shaft. Some minor grinding of the flange may have to be done to clear the steering column.

Any questions, feel free to PM me or email: msg419@aol.com.

Thanks,
Mark