PDA

View Full Version : mp inlet install



XxSlowpokexX
05-04-2008, 12:35 AM
Ok..So I dont have a place on the inlet for the bypass diaphram hose...

also one of the larger stripes hoses has nowhere to go..The one that goes from the return adapter to the sc injlet originally,,,,ANy ideas

Been awhile..On a 94 sc

Thanks

pro street rich
05-04-2008, 08:35 AM
Ok..So I dont have a place on the inlet for the bypass diaphram hose...

also one of the larger stripes hoses has nowhere to go..The one that goes from the return adapter to the sc injlet originally,,,,ANy ideas

Been awhile..On a 94 sc

Thanks

use a splitter to put two hoses on the same hole. that is one way to get it hooked up...Rich

XxSlowpokexX
05-04-2008, 12:49 PM
seems thats today sproject amung others!

XxSlowpokexX
05-05-2008, 12:32 AM
teed of the rear vacuum hose I wa shaving an issue with...Now just need to find the proper brass fitting for the bypass line...Looks to be 1/8" but cant find anything locally

Burbank95sc
05-05-2008, 06:12 PM
Here are few pictures of my 95 with MP plenum

CMac89
05-05-2008, 07:28 PM
teed of the rear vacuum hose I wa shaving an issue with...Now just need to find the proper brass fitting for the bypass line...Looks to be 1/8" but cant find anything locally

On the rear of the inlet is 1/4" NPT to a 3/8" hose barb and the front is 1/8" NPT to 3/16" hose barb.

If you have a Lowe's or Home Depot then you will more than likey find a 1/4"NPT to 3/16" hose barb fitting that you can use put into the rear of the inlet.

XxSlowpokexX
05-05-2008, 08:42 PM
Thanks guys,

i need that front one,,,ill find it somewhere eventually

89XR7TD
05-06-2008, 11:57 PM
These are the pics I've been looking for:)

Thanks from me too!!!!!!!

XxSlowpokexX
05-08-2008, 09:41 AM
So far I cant find that front fitting anywhere..Its definitely not 1/4" in looks to be 1/8"

Ill do some more looking this weekend

CMac89
05-08-2008, 11:30 AM
So far I cant find that front fitting anywhere..Its definitely not 1/4" in looks to be 1/8"

Ill do some more looking this weekend


On the rear of the inlet is 1/4" NPT to a 3/8" hose barb and the front is 1/8" NPT to 3/16" hose barb.

I had to order one from Summit/Jegs.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=GAR%2DJ9026&N=700+115&autoview=sku

David Neibert
05-08-2008, 12:00 PM
So far I cant find that front fitting anywhere..Its definitely not 1/4" in looks to be 1/8"

Ill do some more looking this weekend

Home Depot or Lowes usually has a good selection of brass hose barb type fittings.

David

XxSlowpokexX
05-08-2008, 10:55 PM
Neither by me have them..I have one speed shop to go to..Or just order

Burbank95sc
05-08-2008, 11:18 PM
I got all the connectors for my plenum at Ace Hardware store.

pro street rich
05-09-2008, 07:34 AM
Neither by me have them..I have one speed shop to go to..Or just order

Any store that has a Dormann setup will have your needs. These are not odd ball parts. you should be able to find them even if you live out in the farm country.. Good luck, and if you can't find them then P.M. me and I will get the complete set and send them to you.....Rich

XxSlowpokexX
05-09-2008, 01:56 PM
Thansk Rich,

I actually live in NYC which is why it may be hard. I keep finding 1/4" but not the 1/8" I need for the front..Seems silly if you ask me!

CMac89
05-09-2008, 02:47 PM
If you can't find any, then I can ship you one.

XxSlowpokexX
05-09-2008, 02:54 PM
Well see by this weekend..Thsi is teh problem with home depots closing down teh lil guys. At first Home Depot has everything you need..Then slowly they pul the lil stuff