Bacondoggy
Registered User
Ok, I need to replace the seal on the snout, and I have read on here by serching how to remove the pulley, and in some cases the nut, BUT I have 2 problems. #1 I do not have the stock pulley, I believe it is a 10% on this one... #2 The supercharger is off the car and apart. So I have JUST the snout, with the nut and pulley on it. My question is how do I get the nut off? I took it to a local machiene shop, and the guy said he might ruin the pulley. He told me he was going to take a bearking splitter and thentake the nut off, but if its on really tight, that it might "roll over" and then it will screw up the pulley, or mess it up so the belt wont be right on it... All the searches I read, explained how to take the nut off, when it was on the car... any help here would be great! Thanks!