motor mount bolt

Lets see... the bolts are all 13mm with the exception of the nut that holds the ground strap on and it is 15mm. The large nut holding the mount stud to the top bracket is something like 22-24mm.. it is usually VERY very tight. I've had to get quite creative in getting enough leverage to remove them, without benefit of a steel vise, in the past. ;) Oh.. and of course the other bolts are no walk in the park either. :rolleyes: Use 1/2" drive tools and 6pt sockets if you can. I've shattered a craftsman 13mm 6pt socket on the through frame bolt before. :eek:
 
Last edited:
Back
Top