Injector harness

Good morning

The connector does not need to attached to the EGR sensor to start the engine. I assume the ECU does not have a EGR function?
 
No the upshift light isn't on.

I had thought he head gaskets were blown so I went and pulled the motor and replaced them. Got it all back together it fired right up. Turns out I had 4 cracked pistons instead. So I got the engine out again and pulled pistons out of a donor engine and replaced them. And now it cranks but doesn't start.
 
I had thought he head gaskets were blown so I went and pulled the motor and replaced them. Got it all back together it fired right up. Turns out I had 4 cracked pistons instead. So I got the engine out again and pulled pistons out of a donor engine and replaced them.

Good info, thanks for the details...

now it cranks but doesn't start.

Got it - that no-start troubleshooting linked procedure is your friend, I think. Just be sure to do the basics, such as a charged battery, and fuel in the tank, w/pressure at the rail.

Good luck.
 
Back
Top