Nice looking stang, wish your SC were a little closer and I didn’t already have an SC project.
Good luck with your sale.
Someone wants that rare car!
Type: Posts; User: Plat0ribs
Nice looking stang, wish your SC were a little closer and I didn’t already have an SC project.
Good luck with your sale.
Someone wants that rare car!
Nice car, shouldn't have any problem getting your asking, notwithstanding the Teves II that's the schnizzle!
Never mind
FYI
These are now available at Rockauto see "body control module" under electronics tab.
Also available from some auto parts houses.
These are reman'd components from Cardone and Standard Motor...
Need an IRCM from a 95 SC, shipped to 60107
Call me at 630-440-9150 ASAP.
Clicking was ID'd to be the ARC shocks not being found.
Beginning to suspect the ICRM.
Is there a difference between the early & late model ICRM's?
5-speed & auto?
I’ve got an intermittent no start problem on a 95 Auto SC.
I’ve replaced the fuel pump (and complete fuel sending unit) and filter recently.
When I turn the key on I get two clicks from the left...
I had this a few months ago, couldn't possitively ID fuel pump, but not knowing the history I had the entire sending unit replaced along with fuel filter, also took the engine down to the head...
I hope to race my bone stock 95, no truck.
That's funny...
Beautiful!
Wanting to know what's needed besides the mechanical stuff for a 5-speed swap in a 1995 SC.
Does the existing wiring for the auto car have what you need for the 5-speed?
Does the EEC need to be...
This is actually the second one I've bought in the last few months. I bought the white one Randy sold a couple of years ago that came back with blown HG's. after Randy put new HG's on it I went to...
Thank for the confirmation Mike! Can I cut the OE down tube and use them as the starting place for the X-pipe retrofit from MES instead of using their gen 1 parts?
I pulled codes last night after...
Pretty sure they won't work on the Gen 2 application.
The color change was performed relatively Professionally, door jamb, trunk and underhood rails were all taped off and painted to make for a more finished look. the paint surface appears to have some...
I just finished driving home in my new 95 SC Auto. It has 117K miles, rebuilt engine 45K ago, factory rebuilt Transmission 85K ago, new coat of paint in 06, a bunch of suspension parts over 2011 to...
Wow, nice car @ $2000 to only need a slave cylinder!
And $4000 to the OP seems low but is very realistic considering the current market for a car with that many miles.
I wish I had this advice 7 years ago before I began buying stuff. I suppose at this point in my project (parts aquisition mostly complete) I'll be able to build to a slightly higher output, but this...
Bad form jman...
Check with Dave Clark (davec73) for carbonfiber dip treatment on the plastic parts. He has done quite a few engine components and his wheels to quite a good affect.
I really like those floormats,...
Did this car get sold?
Please send me some pictures of this car to cgatesatmedousadotcom.
Or call me at 630-440-9150 to discuss in greater detail.
The gift that keeps on giving...:p
What's the chance you could get this vehicle ready to drive back to Chicago?
Call me if you want to discuss this in greater detail. 630-440-9150