Search:

Type: Posts; User: XxSlowpokexX

Search: Search took 0.04 seconds.

  1. wonder if you can up the torque then..Id stay...

    wonder if you can up the torque then..Id stay away from the tfs cams..They dont even work all that well on a fuel injected engine
  2. about time Shane...Thought you died!.. I think...

    about time Shane...Thought you died!..

    I think you need a real cam:O) Numbers are good but you can do much better with what you have there
  3. Shane, Glad to see you finally got it all...

    Shane,

    Glad to see you finally got it all together. Been a long time commin!
  4. Hey congrats SHane. Lookin good!

    Hey congrats SHane. Lookin good!
  5. I with Chris..Smoth out the sharp / rough edges...

    I with Chris..Smoth out the sharp / rough edges...
  6. usually they stang numbers in teh rods and...

    usually they stang numbers in teh rods and pistons when balanced at a machine shop...iF YOU DIDNT get the assymbly balanced I doubt the pistons will tell you anything. The factory rods however if I...
  7. I agree with David

    I agree with David
  8. get some silly puddy (really) and cover both...

    get some silly puddy (really) and cover both valve reliefs. Install one head with gasket and preload all lifters. Spin engine by hand. Pull head off and check to see how much the valve has indented...
  9. Check piston to valve clearence anyway with eth...

    Check piston to valve clearence anyway with eth twisted wedge heads..You should be ok but its easy enough to check
  10. You going to reuse your tbird crank?...Balance...

    You going to reuse your tbird crank?...Balance everythng ro just slap it together?
  11. WHat exactly did you buy?

    WHat exactly did you buy?
  12. SHane the balance is different

    SHane the balance is different
  13. Good luck..You can still keep this one around and...

    Good luck..You can still keep this one around and experiment
  14. Hed have to return the intake as it wont fit the...

    Hed have to return the intake as it wont fit the 351.

    I dont see you getting that much more from the 351. Racing both a 351 powered stang and a 302 powered stang with sim mods at limerock you can...
  15. With the 351 you may end up with low compression....

    With the 351 you may end up with low compression. Unsure.....plus in autocrossing..Less weight in front is good!
    302 302 302 302~~!!!
  16. Shane...You can throw the block and heads in the...

    Shane...You can throw the block and heads in the car so they can mock up whatever they want
  17. Its generally not an extra 50rwhp thats for sure....

    Its generally not an extra 50rwhp thats for sure.

    And with a road race car you want less weight up front..And with a 331 stroker...Well Id go 302

    As for being ironic...

    faillproof=$$$ that...
  18. stick with the 302 based LIGHTER motor...

    stick with the 302 based LIGHTER motor...
  19. 302 is much lighter. i would also hazzard a...

    302 is much lighter. i would also hazzard a guess putting a 351 in may limit certain classes you will want to enter. I;d stick 302 based stroker.
  20. I would say why but at this point....

    I would say why but at this point....
  21. Shane you would have had an eventual failure...

    Shane you would have had an eventual failure although I have pulled apart perfectly running engines with pistons that look just like that...

    Without spending to much you can get away with a set of...
  22. Shane sounds good to me...Think ya shoulda went...

    Shane sounds good to me...Think ya shoulda went hydraulic roller though..

    Is that a vacuum secondary carb or double pumper

    Good luck
  23. Also.. As David said...I saw Solid...

    Also..

    As David said...I saw Solid Lifters....What cam did you get exactly?

    You did not say solid roller..With the twisted wedge heads I think anything over 520 lift with a hydraulic motor...
  24. Here are my thoughts if anyone cares. #1 This...

    Here are my thoughts if anyone cares.

    #1 This is a learning experience for Shane. Good for him in having the innitiative to do this himself. I was under the impression someone else was doing it...
  25. Dude..They are going to hot tank that SOB no?..If...

    Dude..They are going to hot tank that ~~~ no?..If your bored you can come on over to NY I have plenty of stuff ya can do :O)
Results 1 to 25 of 25