Search:

Type: Posts; User: KMT

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. 6

    He overhauled an SC/TEVES ABS pump motor for me last Sept.

    Ken
  2. Replies
    3
    Views
    91

    The usual culprit is the multi-wire ignition...

    The usual culprit is the multi-wire ignition switch down on the side of the steering column, inside the dash (not the lock cylinder assy.).

    These are prone to fail when the shell/connector move...
  3. Replies
    2
    Views
    108

    Correct. AFAIK, modifier for the trans is...

    Correct.

    AFAIK, modifier for the trans is meant to -increase- friction on the synchronizer rings. Those are responsible for helping the gears match rotational speed as they make contact and reduce...
  4. Replies
    16
    Views
    1,071

    Score! Thanks for the followup. Ken

    Score! Thanks for the followup.

    Ken
  5. Replies
    16
    Views
    1,071

    It is a hard plastic, vs. rubber/silicone, which...

    It is a hard plastic, vs. rubber/silicone, which tend to collapse under vacuum (not pressure) as found in these circuits. Might be best to avoid the risk if you DIY, especially when the proper...
  6. Thread: Weird reactions

    by KMT
    Replies
    3
    Views
    269

    Where are the range gauges on the tensioners? ...

    Where are the range gauges on the tensioners?

    Any soot from rubber belt shedding on the hood blanket over the snout?

    If you know you need at least one belt, get it done and see if your problem...
  7. Good news that - thanks for the wrap up, and...

    Good news that - thanks for the wrap up, and Happy Holidays!

    Ken
  8. Replies
    2
    Views
    186

    Sean I don't know which year SC you're working...

    Sean

    I don't know which year SC you're working on, but as I recall, early/90 sees hot at all times pin 8, and hot start/run pin 13. Nothing is going out to the EEC (pin 24?) if pin 8 isn't hot.
    ...
  9. Thread: Cars and Kool-Aid

    by KMT
    Replies
    0
    Views
    157

    Cars and Kool-Aid

    My friend the single Dad and his two young sons decided that they would create a new kid-centric YT channel...something they could do together, while finding a use for some of the time they have on...
  10. I replaced that hose on my Anny less than a year...

    I replaced that hose on my Anny less than a year back. Not sure I recall all details, so... As already noted, that's one of the upper heater hoses. I think there is a PDF with an drawing that shows...
  11. Thread: Horn Pad

    by KMT
    Replies
    2
    Views
    206

    Horn Pad

    I have one - tried to send PM, but your inbox is full.

    Ken
  12. You can see the fire ring fail on the headgasket,...

    You can see the fire ring fail on the headgasket, back cylinder around 10 o'clock...pretty common location, I think, mine was down around 8.

    For the block, just clean it, being sure to inspect as...
  13. Replies
    21
    Views
    1,657

    Can you hear the pump run? Check high current...

    Can you hear the pump run?

    Check high current fuel pump relay fuse in the PCB in front of the battery. Consider testing/replacing the fuel pump relay, which I think is in the trunk near the fuel...
  14. AFAIK, the harness is in all SCs whether or not...

    AFAIK, the harness is in all SCs whether or not the VMM is installed, so you should be ok to run without it if you want.

    As for a double din, there was someone here that did it, but I recall one...
  15. Replies
    12
    Views
    1,274

    Got it, thanks - I thought maybe you'd be in the...

    Got it, thanks - I thought maybe you'd be in the market.

    Good luck w/the swap, keep us posted on how it works out if you have the time to share, pls.

    Ken
  16. Replies
    12
    Views
    1,274

    Suggest you wait & ask Charles those questions,...

    Suggest you wait & ask Charles those questions, but, those gears (vs. the rotors) are isolated to the snout, and nothing from any parts in there can get into your motor. In the mean time, I wouldn't...
  17. Replies
    12
    Views
    1,274

    Might want to talk to Charles @ magnum powers,...

    Might want to talk to Charles @ magnum powers, here in Oregon. He specializes in our M90.

    https://magnumpowers.com

    I'd give him a call for advice/options/rebuilding/parts.

    Not sure I'd rely...
  18. Shocks for the SC's auto ride control system are...

    Shocks for the SC's auto ride control system are very hard to find, meaning no longer available new from the parts industry.

    You can search here for tips on using non-ARC type shocks, or perhaps...
  19. Thread: Cruise Control

    by KMT
    Replies
    10
    Views
    1,119

    Yes - if it doesn't hold vacuum when you block...

    Yes - if it doesn't hold vacuum when you block off the BK/Y port, it seems to have failed.

    The valve at the pedal should vent/open to the atmosphere when the pedal is pushed.

    Put vacuum to the...
  20. Replies
    1
    Views
    390

    Msg. sent. Ken

    Msg. sent.

    Ken
  21. Replies
    3
    Views
    458

    Sending you an email... Ken

    Sending you an email...

    Ken
  22. Replies
    4
    Views
    807

    I don't remember the details, but I know I didn't...

    I don't remember the details, but I know I didn't fully skin either section.

    If you're only doing the 60% side cover, it might be less work to swap skins, tho.
  23. Replies
    4
    Views
    807

    Tim: As I recall, they come out w/the...

    Tim:

    As I recall, they come out w/the bolster...

    I swapped my bolster twice now, but I don't recall anything major when retaining the original seat backs as part of that process:
    ...
  24. Thread: Please Help

    by KMT
    Replies
    5
    Views
    895

    This is for an '89, but it may still provide some...

    This is for an '89, but it may still provide some help:

    http://mnharms.com/tutorials/disnostart/


    Good luck.
  25. Replies
    16
    Views
    1,944

    Big E ??...

    Big E ??...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4