Search:

Type: Posts; User: MadMikeyL

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    5
    Views
    418

    In the video, there was also a 90XR7 in the...

    In the video, there was also a 90XR7 in the collection, which he purchased as well, but they only ever showed it from across the garage.
  2. Replies
    4
    Views
    164

    If you already have the engine out of the car,...

    If you already have the engine out of the car, and don't know for sure that the head gaskets have been replaced, I would do them. If you put the engine back in, and had to tear it all back down in...
  3. 94/95s have one of the holes in a different place...

    94/95s have one of the holes in a different place than the pictures that were on TCCoA. Make sure to get the updated accumulators cause the 94/95 trans has the older style aluminum ones. I always go...
  4. Replies
    5
    Views
    374

    At 65K, the timing chain and tensioner are...

    At 65K, the timing chain and tensioner are probably fine. I would just do a visual inspection, and as long as they aren't excessively worn, leave them alone. I would also definitly leave the oil...
  5. Replies
    3
    Views
    306

    You are correct that the 89-91s have only...

    You are correct that the 89-91s have only reflectors. The easiest way to get LEDs in there is to switch to a 92-97 trunklid and tail lights.
  6. Poll: I think you are overthinking it. Personally, I...

    I think you are overthinking it. Personally, I think just having it be a supercoupe is specific enough, but if it works better for the plot for it to be any particular year, make it that year. As...
  7. I would just get the ATP one, swap it out, and...

    I would just get the ATP one, swap it out, and worry about it in another 100k miles.
  8. It is a 9/16” 6 point socket you need to remove...

    It is a 9/16” 6 point socket you need to remove the K-member bolts. There are actually 8 of them, 4 per side. My method of lowering it is a little different. I leave the shocks in place and just...
  9. No you don’t. Loosen the bolt but leave it still...

    No you don’t. Loosen the bolt but leave it still threaded in a few turns. Now grab both sides of the wheel and wiggle back and forth while pulling on it as hard as you can. It will come right off.
  10. It is a direct swap, no need to change the column...

    It is a direct swap, no need to change the column or anything.
  11. You can squeeze it out if you lift the engine up...

    You can squeeze it out if you lift the engine up and also drop the K-member down.
  12. Replies
    30
    Views
    3,093

    No * required as far as I'm concerned. Everyone...

    No * required as far as I'm concerned. Everyone who has done this has meticulously planned when to do it so as to minimize traffic, and you can rest assured that Alex Roy and Ed Bolian would have...
  13. Replies
    30
    Views
    3,093

    And there's a new record yet again! 26:38!...

    And there's a new record yet again! 26:38!
    https://www.youtube.com/watch?v=hU9tbwBzQKc
  14. I would just order a set of reman’d calipers for...

    I would just order a set of reman’d calipers for peace of mind. They are like $35ea on rockauto and you can send those ones back for the cores. Plus reman’d calipers come with new banjo bolts, so...
  15. There are 2 different versions of the PBR...

    There are 2 different versions of the PBR calipers; 99-02 and 03/04. One version uses the same thread on the banjo bolts as the stock Tbird calipers, and the other uses a different thread....
  16. Yup, those are the PBR calipers, so it was...

    Yup, those are the PBR calipers, so it was already converted. If you didn’t grab the banjo bolts for the calipers though, then you may wind up having to get reman’d ones anyway, since those bolts can...
  17. I’m a little confused. Did the car you got the...

    I’m a little confused. Did the car you got the parts from already have dual piston calipers on it? If so, then someone already did the PBR brake swap. If not, then you need calipers for a 99-04...
  18. Replies
    2
    Views
    251

    Good news, the car is a 95! There was no SC made...

    Good news, the car is a 95! There was no SC made in 96 or 97, and based on the picture, it is clearly a 94/95 car!
  19. Replies
    3
    Views
    823

    Good luck with the project! Sounds like you are...

    Good luck with the project! Sounds like you are on the right path with bagging and labeling everything. As far as what not to put back on, the only thing that comes to mind is the bracket that goes...
  20. Replies
    3
    Views
    488

    Auto or 5-speed? Cloth or leather interior? How...

    Auto or 5-speed? Cloth or leather interior? How is the body? Any rust? How about the paint?
  21. Replies
    6
    Views
    510

    That isn’t a head gasket issue, that is just from...

    That isn’t a head gasket issue, that is just from coolant sitting for 20 years. I would start by chipping away what you can see there, fill the block as much as you can with some CLR, and then flush...
  22. Replies
    2
    Views
    585

    The exhaust bolts are usually pretty rusted, so...

    The exhaust bolts are usually pretty rusted, so spraying those with the PB couldn’t hurt. Grab a pack of zip-lock bags to sort and label bolts things to make it easier going back together. Leave the...
  23. Replies
    16
    Views
    1,050

    It was kept in a barn for 10 years, then outside...

    It was kept in a barn for 10 years, then outside on the side of my shop for the last 2. The car is everything I wanted though, black on black XR7 5-speed with cloth interior and a sunroof, so I'll...
  24. Replies
    16
    Views
    1,050

    Well I just got the 90XR7 on the road last week,...

    Well I just got the 90XR7 on the road last week, but before that it was last on the road in 07. The suspension could use a full rebuild, there’s no radio in it, the sunroof doesn’t work, the interior...
  25. Replies
    13
    Views
    990

    I don’t care how good the reviews are, I don’t...

    I don’t care how good the reviews are, I don’t trust Chinese tires any further than I can throw them. Your best bet for a performance tire in the stock size is the Goodyear eagle RS-A police tire....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4