Search:

Mullets went hard in 1996! Thanks for sharing.

-Tim

I've probably owned 35 or so SC's and probably replaced headgaskets a similar amount of times. Personally I've blown that same hose and also had similar fears of headgaskets. From what you described...

Very common on all years on MN12s. Usually caused by the air inlet thats under the passenger side cowl.

Several writeups over the years. Responding on mobile so hard to link. Usually some...

Likely it's a unit with the battery soldered onto the board. If you reach out to moates they will replace it for free on an exchange.

Also the other piece will be finding out who has the orginal...

If I remeber correctly when my QH failed accessory on also caused the fan to run on high. I believe that's the tell tale sign its a dead battery.

-Tim

I have both in my parts pile.

Email me if interested [email protected]

-Tim

Dave Clark has a double DIN setup

http://www.sccoa.com/forums/garage_attachment.php?id=3021

Can be done...more work than a single din flip out option. Just depends on the amount of work you...

Cleaning the garage. Stuff will likely see the dump in no interested buyers.

4 89-93 Jackshaft brackets
1 94-95 Jackshaft bracket
2 power steering brackets
3 89-93 intake plenum w throttle...

Never been so happy to see someone post on here. Glad you're doing alright.

-Tim

Eddie stored his cars at his friend's mothers house, this also is something Big E said in one of his posts. So thats where I went on both occasions.

Again however if I parked 20 SCs at one of...

I have the seat out of the car just trying to interchange the 60 section of the fold down from 1 to the other. Didnt know if the entire cushion comes off or if removal or each skin and swapping is...

Revived from the dead. You're usually quick to reply also. Dis you ever remove the center sections. I have 2 fold downs that I am trying to combine as 1 with the best sections of leather from each. ...

I have a set shoot me a PM.

-Tim

In my year of ownership I feel on the early models 89-93 when this happens its 1 of 4 things. Harmonic Balancer about to fail, cam sensor failure, crank sensor or DIS module.

Say 75% of all...

I also suggest do 3 days now rather than 1 now and 3 later. Just gives more room for excuse, doubt and life to creep in. Go big let life unfold from giving it your all rather than an entry effort.
...

The interior in my Pearl 95 car has the cheap version of the carpet..its maybe 1/4 in total thickness. Road noise and heat barrier from the lack of mass backing became a real issue on the power tour....

I had it switched to black. My other cars all have black ...keep it going. Doubt a black carpets a deal breaker when selling. Just know how I work...trying to keep my mind on keeping it stock and not...

I agree black carpet is a solid choice. Since I intend to sell this car once I am done I want to keep it as close to OE as possible to not detract a buyer...granted black carpet probably wouldn't...

Buying a new carpet for this 1995 SC with Opal interior.

Apparently there is a back order on Opal colored carpet so I was sent the different options to change the order or ride it out.

Anyone...

NUDES!!!?!?!

-Tim

So ill expand on this a little. If anyone has heard from Eddie aka the big e please post it up. Curiosity really has the best of me.

Many may remember the big e he was a pretty much on the forums...

Under the hood near the rear passenger shock tower there should be a EEC code sticker also.

I've seen COS and A0H0 in 90s ...i think the variance has to do with EGR.

-Tim

As mentioned none of that is factory related wiring.

Also there are several of us here in Virginia if you need another set of eyes/hands, too help.

-Tim

All head gasket failures are different, I've blown many in 16 years and not often were they the same.

I'd park it and make the repairs or sell as it (since your daily posts sound like you're over...

I'm slowly doing a similar process on a 95 SC auto. Mind sharing what paint you used on the Supercharger, looks close to OE.

Thanks and great work!

-Tim